Harley Davidson Forums
Moves you 1" back. Wonder why they made it 'lower' and not just 'back'. Kinda leaves a hump at ones lower back. Wonder how it feels to sit on.
Moves you 1" back. Wonder why they made it 'lower' and not just 'back'. Kinda leaves a hump at ones lower back. Wonder how it feels to sit on.
0 2016/12/20 11:50:30
Does it look strange
Does it look strange
0 2016/12/20 11:50:34
0 2017/01/20 17:18:14
Gunmetal one w/ stitching
Gunmetal one w/ stitching
0 2017/02/01 18:50:25
plain one w/out stitching. Better in rain?
plain one w/out stitching. Better in rain?
0 2017/02/01 18:51:03
0 2017/02/05 09:44:46
how far back does this move one from "stock"? or is it the same as stock?
how far back does this move one from "stock"? or is it the same as stock?
0 2017/02/05 09:59:44
wide tripper 2 up.
wide tripper 2 up.
0 2017/02/05 10:02:16
0 2017/02/05 10:06:54
small one lower left
small one lower left
0 2017/02/24 19:08:36
0 2017/03/18 16:40:09
0 2017/03/30 18:58:36
this one is smaller
this one is smaller
0 2017/04/02 10:42:08
this one is bigger.
this one is bigger.
0 2017/04/02 10:42:21
Front left of bike. Little plastic tab holds the speed sensor wire, per manual need to press/release this.
Front left of bike. Little plastic tab holds the speed sensor wire, per manual need to press/release this.
0 2017/04/06 15:24:31
Front speed sensor. need to snip 2 zip ties holding it to the brake line. Tab needs the same orientation when reinstalling so note how its oriented when you are removing it (take pics)
Front speed sensor. need to snip 2 zip ties holding it to the brake line. Tab needs the same orientation when reinstalling so note how its oriented when you are removing it (take pics)
0 2017/04/06 15:24:34
Rear speed sensor. This is taken from the ground upward. Front of bike is noted via arrow. On this bike re torquing the rear axle bolt requires a specific sequence outlined in the manual due to the wheel bearing. You need a 36mm socket for it.
Rear speed sensor. This is taken from the ground upward. Front of bike is noted via arrow. On this bike re torquing the rear axle bolt requires a specific sequence outlined in the manual due to the wheel bearing. You need a 36mm socket for it.
0 2017/04/06 15:24:37
Inner shoe (not shown) was about the same.
Inner shoe (not shown) was about the same.
0 2017/04/08 07:32:45
0 2017/04/08 07:51:36
0 2017/04/15 16:43:34
0 2017/04/15 16:43:35
This goes around the whole tire, looks like its from the tire mould they pop the tire out of.
This goes around the whole tire, looks like its from the tire mould they pop the tire out of.
0 2017/04/15 16:43:37
0 2017/04/15 16:43:38
0 2017/04/19 15:49:15
This is the Cycle Hill Motorcycle Tire Changer. Not necessarily the one I'd but but the general idea...
This is the Cycle Hill Motorcycle Tire Changer. Not necessarily the one I'd but but the general idea...
0 2017/04/20 17:33:34
0 2017/04/28 17:23:19
0 2017/04/29 08:10:31
0 2017/05/14 19:27:52
note how tip is 'pointy'
note how tip is 'pointy'
0 2017/06/05 08:25:41
Stock bulb tips are hemispheres and not pionty
Stock bulb tips are hemispheres and not pionty
0 2017/06/05 08:27:20
you apply WAX before you spray. If you don't, you cannot peel this off (easily). The kit contains 3M synthetic wax but have read any wax works.
you apply WAX before you spray. If you don't, you cannot peel this off (easily). The kit contains 3M synthetic wax but have read any wax works.
0 2017/06/14 17:03:45
0 2017/06/14 17:03:54
0 2017/06/14 17:04:02
instructions call for 2 layers of tape, but thats on a car hood. I think I used 2 before, but not this time.
instructions call for 2 layers of tape, but thats on a car hood. I think I used 2 before, but not this time.
0 2017/06/14 19:39:04
sprayed.
sprayed.
0 2017/06/14 19:39:14
supposed to remove the tape while its wet else the goo may dry on the tape and when you pull it off, it pulls off the dried coating.
supposed to remove the tape while its wet else the goo may dry on the tape and when you pull it off, it pulls off the dried coating.
0 2017/06/14 19:39:24
no issue if it 'runs'. It dries clear so even a chunky drip isn't quite noticeable, esp in an area around/under the headlight no one sees.
no issue if it 'runs'. It dries clear so even a chunky drip isn't quite noticeable, esp in an area around/under the headlight no one sees.
0 2017/06/14 19:39:32
"1-star being the highest percentage"
"1-star being the highest percentage"
0 2017/06/14 21:38:26
0 2017/06/14 21:40:47
0 2017/06/16 10:31:51
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands