Harley Davidson Forums
0 2018/02/04 08:09:02
0 2018/02/04 08:12:13
0 2018/02/04 08:18:31
0 2018/02/04 08:18:57
0 2018/02/04 09:16:22
0 2018/02/04 09:16:57
0 2018/02/04 09:19:59
0 2018/02/04 09:20:17
0 2018/02/04 09:23:00
0 2018/02/04 09:23:44
0 2018/02/04 09:29:37
0 2018/02/04 09:30:16
0 2018/02/04 09:32:14
0 2018/02/04 09:33:33
0 2018/02/04 09:35:20
0 2018/02/04 09:40:16
0 2018/02/04 16:59:38
0 2018/02/04 17:00:22
This bike was in for a stage 2 boom audio upgrade, handlebars and a wireless Bluetooth headset module install called whim. I work out of a 40” snap on bottom box and I have had the craftsman top box for quite a while and decided I would use that until it bites the dust before I fork over $1800+ for the matching top box. I also have a little service cart that hold my tools so I don’t have stuff all over my lifts when I’m working on bikes. It’s a us general cart from harbor freight. Does the job.
This bike was in for a stage 2 boom audio upgrade, handlebars and a wireless Bluetooth headset module install called whim. I work out of a 40” snap on bottom box and I have had the craftsman top box for quite a while and decided I would use that until it bites the dust before I fork over $1800+ for the matching top box. I also have a little service cart that hold my tools so I don’t have stuff all over my lifts when I’m working on bikes. It’s a us general cart from harbor freight. Does the job.
0 2018/02/05 06:44:55
The wrenches in the black rack are sk, they are decent but I use the snap on and blue point ratchet wrenches daily. Snap on has a longer handle and better leverage. I do use craftsman wrenches daily as well.
The wrenches in the black rack are sk, they are decent but I use the snap on and blue point ratchet wrenches daily. Snap on has a longer handle and better leverage. I do use craftsman wrenches daily as well.
0 2018/02/05 06:45:10
In this drawer I have more torque wrenches which are matco 3/8 and 1/2 drive and my snap on 1/4 drive. My extra long handle ratchet is a 1/2 drive snap on. Works great for axles. I also have my lady feet and snappy pry bars. Some primary locking tools, seal puller and caliper piston spreaders.
In this drawer I have more torque wrenches which are matco 3/8 and 1/2 drive and my snap on 1/4 drive. My extra long handle ratchet is a 1/2 drive snap on. Works great for axles. I also have my lady feet and snappy pry bars. Some primary locking tools, seal puller and caliper piston spreaders.
0 2018/02/05 06:45:39
This is my top drawer. Sockets, allen’s, torx bit sockets, long and long ball allens. The two red trays are snap on. Stubby allen set and a low profile 1/4 drive socket set great for rocker boxes. I have a matco intake manifold wrench which really comes in handy!
This is my top drawer. Sockets, allen’s, torx bit sockets, long and long ball allens. The two red trays are snap on. Stubby allen set and a low profile 1/4 drive socket set great for rocker boxes. I have a matco intake manifold wrench which really comes in handy!
0 2018/02/05 06:46:09
This is my air and power tool drawer along with hammers and an old fork leg for extra breakage power. Snap on/blue point air tools. Kobalt rubber mallet which has been great and I have a nice 32oz snap on ball peen. The others are harbor freight and they’ve worked great too. No complaints.
This is my air and power tool drawer along with hammers and an old fork leg for extra breakage power. Snap on/blue point air tools. Kobalt rubber mallet which has been great and I have a nice 32oz snap on ball peen. The others are harbor freight and they’ve worked great too. No complaints.
0 2018/02/05 06:46:16
Matco tap and die set along with a dremel. I have an extra axle too that way when bikes with timken bearings come in I can take the wheel off put it on my axle and vise and check end play. Easier when it’s off the bike and you get the same results if you do it like this as long as you follow procedure.
Matco tap and die set along with a dremel. I have an extra axle too that way when bikes with timken bearings come in I can take the wheel off put it on my axle and vise and check end play. Easier when it’s off the bike and you get the same results if you do it like this as long as you follow procedure.
0 2018/02/05 06:46:28
Seal drivers, valve lapping tools and extensions. Along with some odds and ends.
Seal drivers, valve lapping tools and extensions. Along with some odds and ends.
0 2018/02/05 06:46:37
Metric stuff which I keep in the top box. Snap on impact sockets and blue point 12 point sockets. I also have some kobalt and craftsman usa stuff in here. The bigger sockets are sk.
Metric stuff which I keep in the top box. Snap on impact sockets and blue point 12 point sockets. I also have some kobalt and craftsman usa stuff in here. The bigger sockets are sk.
0 2018/02/05 06:46:50
Gearwrench ratcheting wrenches with some craftsman combo. I also have long ball allen and shot allen kobalt usa in here. I really only use this stuff if I’m working on vrods which isn’t very often.
Gearwrench ratcheting wrenches with some craftsman combo. I also have long ball allen and shot allen kobalt usa in here. I really only use this stuff if I’m working on vrods which isn’t very often.
0 2018/02/05 06:47:30
Channellock pliers, vise grips, sk wire strippers, matco crimped tool which is awesome! And the silver snap ring pliers are for working on exhaust pipes. There’s a snap ring that holds flanges on where the header pipe attaches to the exhaust studs on the head.
Channellock pliers, vise grips, sk wire strippers, matco crimped tool which is awesome! And the silver snap ring pliers are for working on exhaust pipes. There’s a snap ring that holds flanges on where the header pipe attaches to the exhaust studs on the head.
0 2018/02/05 06:48:25
This drawer I have my snap on snap ring pliers there is one pair missing from the picture and I have ear clamp pliers and some kobalt and matco picks. I also have some Channellock snap ring pliers in there for getting the beefier clips out.
This drawer I have my snap on snap ring pliers there is one pair missing from the picture and I have ear clamp pliers and some kobalt and matco picks. I also have some Channellock snap ring pliers in there for getting the beefier clips out.
0 2018/02/05 06:49:49
In here I have my Carlyle screwdriver set which I love. I think it costs right around $70.00 out the door. They are stout and have a lifetime guarantee. I also have a set of snap on torx screwdrivers t-10 to t-30 they really have a nice grip. Some sk screwdrivers, long Phillips and flat head gearwrench and my matco plier set along with 3 pairs of hose clamps.
In here I have my Carlyle screwdriver set which I love. I think it costs right around $70.00 out the door. They are stout and have a lifetime guarantee. I also have a set of snap on torx screwdrivers t-10 to t-30 they really have a nice grip. Some sk screwdrivers, long Phillips and flat head gearwrench and my matco plier set along with 3 pairs of hose clamps.
0 2018/02/05 06:49:57
0 2018/06/03 15:18:38
0 2018/06/22 16:59:09
0 2018/06/22 16:59:11
0 2018/06/23 02:56:21
0 2018/06/23 02:58:53
0 2018/06/23 03:03:13
0 2018/06/26 15:48:48
0 2018/06/26 15:48:49
0 2018/06/29 04:10:30
0 2018/06/29 04:11:46
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands