Harley Davidson Forums
0 2016/12/19 10:25:35
0 2017/01/03 18:14:58
0 2017/01/25 10:05:48
0 2017/02/03 06:45:56
0 2017/03/04 10:37:12
0 2017/03/04 10:37:18
0 2017/03/11 11:59:21
0 2017/03/14 15:15:37
0 2017/03/17 08:33:16
0 2017/03/21 19:43:18
Teflon tape..., like anti-seize.., is your friend Not on fuel / brake systems - but on oil systems works fine
Teflon tape..., like anti-seize.., is your friend Not on fuel / brake systems - but on oil systems works fine
0 2017/03/23 22:32:37
ANs installed
ANs installed
0 2017/03/23 22:34:35
Why I shortened each end by a 1/4" inch
Why I shortened each end by a 1/4" inch
0 2017/03/23 22:35:12
Fueling oil filter offset - exploded view
Fueling oil filter offset - exploded view
0 2017/03/23 22:37:52
The entire system
The entire system
0 2017/03/23 22:38:21
0 2017/03/24 06:37:14
0 2017/03/27 09:32:34
0 2017/04/01 21:51:23
0 2017/04/01 21:55:44
0 2017/04/01 21:56:13
0 2017/04/01 21:56:33
0 2017/04/01 21:57:10
0 2017/04/01 22:04:40
0 2017/04/02 20:26:32
Why it necessary I moved the jack's cross member rearward
Why it necessary I moved the jack's cross member rearward
0 2017/04/02 20:29:38
Initial view of the oil filter that's fixin to get the oil offset
Initial view of the oil filter that's fixin to get the oil offset
0 2017/04/02 20:30:28
Removed the shift linkage - mow it can be accessed
Removed the shift linkage - mow it can be accessed
0 2017/04/02 20:31:39
Oil filter removed
Oil filter removed
0 2017/04/02 20:32:52
Oil filter still removed
Oil filter still removed
0 2017/04/02 20:33:23
Blue locktight is your friend This the 1" nut that secures the oil offset
Blue locktight is your friend This the 1" nut that secures the oil offset
0 2017/04/02 20:36:14
Oiling the offset gasket
Oiling the offset gasket
0 2017/04/02 20:36:34
Off set installed and capped
Off set installed and capped
0 2017/04/02 20:36:49
Scooter is running in this shot - no leaks Quiet ain't it :)
Scooter is running in this shot - no leaks Quiet ain't it :)
0 2017/04/02 20:37:04
Tube end on the left..., Tube nut on the right
Tube end on the left..., Tube nut on the right
0 2017/04/02 20:46:09
What's needed to make ANs (1) Sharp hacksaw (2) Electrical tape (3) WD40 - or silicone spray (4) Wrench (5) Bench vise..., or another wrench (6) Hose and connector
What's needed to make ANs (1) Sharp hacksaw (2) Electrical tape (3) WD40 - or silicone spray (4) Wrench (5) Bench vise..., or another wrench (6) Hose and connector
0 2017/04/02 20:46:45
WD is really your friend
WD is really your friend
0 2017/04/02 20:49:13
The hose nut screws onto the AN hose until fully seated - use WD30 to help make it easier to get the hose fully seated
The hose nut screws onto the AN hose until fully seated - use WD30 to help make it easier to get the hose fully seated
0 2017/04/02 20:50:10
Inserted hose end..., into hose nut..., after hose fully seated into hose nut
Inserted hose end..., into hose nut..., after hose fully seated into hose nut
0 2017/04/02 20:58:04
Hold stationary hose nut - while tightening hose end into hose nut - spray WD40 onto hose end..., to help it seat into hose / hose end
Hold stationary hose nut - while tightening hose end into hose nut - spray WD40 onto hose end..., to help it seat into hose / hose end
0 2017/04/02 20:58:55
One end completed - measuring / marking in preparation to make other end - for proper length - mark hose where the hose nut meets the hose end
One end completed - measuring / marking in preparation to make other end - for proper length - mark hose where the hose nut meets the hose end
0 2017/04/02 21:01:08
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands