Harley Davidson Forums
0 2018/01/17 12:18:30
0 2018/01/17 12:18:11
0 2018/01/15 17:03:29
I put the OEM trans back in to check the belt alignment, what I didn't take a pic of was with the rear tire and pulley...
I put the OEM trans back in to check the belt alignment, what I didn't take a pic of was with the rear tire and pulley...
0 2018/01/15 15:01:01
Primary remove and sent it..
Primary remove and sent it..
0 2018/01/15 14:59:50
0 2018/01/14 13:17:10
0 2018/01/14 13:15:56
0 2018/01/14 04:23:46
0 2018/01/10 14:16:32
0 2018/01/10 06:44:26
0 2018/01/09 09:58:46
0 2018/01/09 09:58:32
0 2018/01/08 06:59:52
0 2018/01/05 15:15:45
0 2018/01/04 14:25:48
0 2018/01/04 14:25:01
0 2018/01/04 09:57:21
0 2017/12/18 15:20:52
0 2017/12/18 15:19:31
0 2017/12/18 10:19:57
0 2017/12/18 10:19:24
0 2017/12/12 06:53:05
0 2017/12/02 06:42:55
0 2021/01/02 17:33:28
0 2017/11/12 03:33:12
0 2021/01/03 16:55:25
OEM wouldn't cut it....
OEM wouldn't cut it....
0 2017/11/06 04:03:47
0 2021/01/07 04:13:04
0 2017/11/06 04:01:36
I was a little surprised to see all the mold under the desk.. There were other areas that had mud in them that shouldn't have been. You'll see in a couple of the pictures that there was more must.. when I replaced the rear pulley with a 68 tooth of a supporter the insides of the asked was packed as well.. I think this bike was in a good...
I was a little surprised to see all the mold under the desk.. There were other areas that had mud in them that shouldn't have been. You'll see in a couple of the pictures that there was more must.. when I replaced the rear pulley with a 68 tooth of a supporter the insides of the asked was packed as well.. I think this bike was in a good...
0 2021/01/18 15:28:10
0 2017/11/02 03:46:03
Take a good look at the backbone it should be that dirty...
Take a good look at the backbone it should be that dirty...
0 2021/01/18 15:35:23
0 2017/10/31 03:38:58
More mud.. looks like Alabama dirty too me... Lol. It don't get up there by itself....
More mud.. looks like Alabama dirty too me... Lol. It don't get up there by itself....
0 2021/01/18 15:37:04
0 2017/10/29 03:29:53
I got the front rocker cover off and everything looked good.. Infact when I took the bolts out for the rocker assembly, there was drag on the bolt all the way till it was out.. tells me the Ticket shafts should be ok... Never I've had the balls out twice so far and the top end was quiet so I should be ok..
I got the front rocker cover off and everything looked good.. Infact when I took the bolts out for the rocker assembly, there was drag on the bolt all the way till it was out.. tells me the Ticket shafts should be ok... Never I've had the balls out twice so far and the top end was quiet so I should be ok..
0 2021/01/18 15:38:57
0 2017/10/25 10:00:31
Took a peek at the top of the pistons and was surprised that there was not a lot of carbon build up.. It still has the beaters going into the intake . I will br taking care of that very soon...
Took a peek at the top of the pistons and was surprised that there was not a lot of carbon build up.. It still has the beaters going into the intake . I will br taking care of that very soon...
0 2021/01/18 15:42:41
0 2017/10/22 07:10:30
So when I took the cylinders of to replace the base o-rings, I was surprised to see the the rings including the pool scrapers we're more lined up than I thought they would be.. Keep in mind there's only 20k on this motor... It didn't smoke and the compression was good.. I tested it before the year due.. 178 front and 170 rear..... Always good info to have... And should be one of the first thing you should do of you can before a year down.. So putting them back into their proper positions shoul
So when I took the cylinders of to replace the base o-rings, I was surprised to see the the rings including the pool scrapers we're more lined up than I thought they would be.. Keep in mind there's only 20k on this motor... It didn't smoke and the compression was good.. I tested it before the year due.. 178 front and 170 rear..... Always good info to have... And should be one of the first thing you should do of you can before a year down.. So putting them back into their proper positions shoul
0 2021/01/18 15:47:24
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands