Harley Davidson Forums
0 2018/09/01 15:50:12
Hope you can see this OK
Hope you can see this OK
0 2018/09/01 15:54:13
First step was to remove this Frame bolt
First step was to remove this Frame bolt
0 2018/09/03 09:28:05
1. Purchased a 2" angle bracket from Lowes, increased hole sizes to suit and trimed with my grinder cut off wheel. 2. New 5/16X3/4 SS bolt (the one supplied was too long) 3. Existing frame bolt needed to be inserted into angle bracket before SS nut could be installed and tighteded with lock washer and blue locktite.
1. Purchased a 2" angle bracket from Lowes, increased hole sizes to suit and trimed with my grinder cut off wheel. 2. New 5/16X3/4 SS bolt (the one supplied was too long) 3. Existing frame bolt needed to be inserted into angle bracket before SS nut could be installed and tighteded with lock washer and blue locktite.
0 2018/09/03 09:30:13
Soldered the red wire to the main battery cable just behind the main fuse which is located under the left side cover. This is the power to the relay located under my seat.
Soldered the red wire to the main battery cable just behind the main fuse which is located under the left side cover. This is the power to the relay located under my seat.
0 2018/09/03 09:35:45
1. Relay under seat tucked down under side rail just above where horn is installed below. 2. Ran the two yellow wires from stock horn to relay as required in the wiring diagram from Wolo. Ran them in a black flex tube under the gas tank.
1. Relay under seat tucked down under side rail just above where horn is installed below. 2. Ran the two yellow wires from stock horn to relay as required in the wiring diagram from Wolo. Ran them in a black flex tube under the gas tank.
0 2018/09/03 09:40:50
1. Ran wires down to horn in flex tube. 2. Reinstalled Frame bolt with blue Locktite. 3. Top of horn was plain metal where I removed the logo sticker. Painted it Gloss black with Krylon Automotive paint.
1. Ran wires down to horn in flex tube. 2. Reinstalled Frame bolt with blue Locktite. 3. Top of horn was plain metal where I removed the logo sticker. Painted it Gloss black with Krylon Automotive paint.
0 2018/09/03 09:48:02
Here is a full side view I wanted to include with the previous post. The Wolo horn is very inconspectuous.
Here is a full side view I wanted to include with the previous post. The Wolo horn is very inconspectuous.
0 2018/09/03 10:35:50
0 2018/09/12 16:33:36
0 2018/09/12 16:33:37
You can see the backrest above the rear of the seat.
You can see the backrest above the rear of the seat.
0 2018/09/12 16:33:41
My suggested design to suit my rear saddlebag guards
My suggested design to suit my rear saddlebag guards
0 2019/02/19 08:40:47
0 2018/10/23 05:08:36
0 2019/02/19 09:00:44
0 2018/10/23 05:08:43
0 2018/10/23 05:08:43
0 2019/02/19 09:00:52
0 2019/02/19 09:01:00
0 2018/10/23 05:10:35
0 2019/02/19 09:01:06
0 2018/10/23 05:10:37
0 2019/02/19 09:01:13
0 2018/10/23 05:10:37
0 2019/02/19 09:01:20
Run mode. Quite bright. What looks Yellowish in photo is actually Red.
Run mode. Quite bright. What looks Yellowish in photo is actually Red.
0 2018/10/31 05:29:58
Custom made Puck Holster mounted on Saddlebag Guard
Custom made Puck Holster mounted on Saddlebag Guard
0 2019/02/25 08:33:56
Brake mode. Very bright. The tripple Play module has 10 various strobe setting to choose from. Also, turn signals work as normal.
Brake mode. Very bright. The tripple Play module has 10 various strobe setting to choose from. Also, turn signals work as normal.
0 2018/10/31 05:29:59
Easily accessed while still straddleing the bike.
Easily accessed while still straddleing the bike.
0 2019/02/25 08:34:04
Inconspecuous and does not interfere with Passenger foot
Inconspecuous and does not interfere with Passenger foot
0 2019/02/25 08:34:11
Top view.
Top view.
0 2019/02/25 08:34:19
The Jiffy Stand Puck "Holster" hung on the left side saddle bag guard
The Jiffy Stand Puck "Holster" hung on the left side saddle bag guard
0 2019/02/25 09:42:16
Cover closes with velcro so very easily reached while still straddleing the bike.
Cover closes with velcro so very easily reached while still straddleing the bike.
0 2019/02/25 09:42:24
Very inconspecuous and does not interfere with the passengers foot
Very inconspecuous and does not interfere with the passengers foot
0 2019/02/25 09:42:31
Inside of LP saddlebag.
Inside of LP saddlebag.
0 2018/12/14 04:57:35
Photo not great as it was getting late when it was taken.
Photo not great as it was getting late when it was taken.
0 2018/12/15 04:45:04
Top view. Might add a small security wire device to make sure it can not be snatched off the bike...if someone swipes the puck, oh well, you just can't tie every thing down.
Top view. Might add a small security wire device to make sure it can not be snatched off the bike...if someone swipes the puck, oh well, you just can't tie every thing down.
0 2019/02/25 09:42:38
My S.O. got me this set of LED down lighting for Christmes. Approx $60. Installed them today
My S.O. got me this set of LED down lighting for Christmes. Approx $60. Installed them today
0 2018/12/27 15:43:37
Note the neat Pin striping
Note the neat Pin striping
0 2019/03/13 17:34:55
0 2018/12/27 15:47:17
Right Front
Right Front
0 2019/03/13 17:37:19
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands