Harley Davidson Forums
0 2025/02/08 08:34:16
0 2015/12/23 10:57:39
Followed the service manual.
Followed the service manual.
0 2014/03/14 08:40:37
0 2014/03/14 08:15:13
There is an inch gab between bars and windshield.
There is an inch gab between bars and windshield.
0 2014/03/14 08:15:13
I followed this youtube video, and the service manual, to replace stock clutch cable with the 10" cable. How to Remove the Clutch Cable on a Harley Davidson Big Twin by smallengineshop.
I followed this youtube video, and the service manual, to replace stock clutch cable with the 10" cable. How to Remove the Clutch Cable on a Harley Davidson Big Twin by smallengineshop.
0 2014/03/14 08:15:13
Riser is stock. Polyurethane bushings were new and required periodic tightening after installation as they compressed over time . You can see the brake cable on the lower left.
Riser is stock. Polyurethane bushings were new and required periodic tightening after installation as they compressed over time . You can see the brake cable on the lower left.
0 2014/03/14 07:59:19
Nacelle after installation. Organized in a way as to not create parts rubbing against each other. Wanted very little movement in the wires as I turned the handlebars back and forth.
Nacelle after installation. Organized in a way as to not create parts rubbing against each other. Wanted very little movement in the wires as I turned the handlebars back and forth.
0 2014/03/14 07:59:19
Bled the brakes after installing the cables using a Midyvac pump shown here (Harbor Freight). I followed this video: Motorcycle Brake Repair: Replacing, Bleeding fluid by smallengineshop.
Bled the brakes after installing the cables using a Midyvac pump shown here (Harbor Freight). I followed this video: Motorcycle Brake Repair: Replacing, Bleeding fluid by smallengineshop.
0 2014/03/14 07:59:19
Cleaned off the old bars. Note the colored towels covering painted areas, a must needed precaution for me.
Cleaned off the old bars. Note the colored towels covering painted areas, a must needed precaution for me.
0 2014/03/12 12:21:35
On 2010 RK's there is a small metal post where the new brake line connector is supposed to connect to the frame, however, the Drag Specialty brake line doesn't have an indent to fit around the post so there are two options: 1) grind down the post, 2) insert a 3/16" thick spacer between connector and bike. I chose the spacer and it seems to be working good.
On 2010 RK's there is a small metal post where the new brake line connector is supposed to connect to the frame, however, the Drag Specialty brake line doesn't have an indent to fit around the post so there are two options: 1) grind down the post, 2) insert a 3/16" thick spacer between connector and bike. I chose the spacer and it seems to be working good.
0 2014/03/12 12:21:35
view of where the brake line connects to the frame under the nacelle
view of where the brake line connects to the frame under the nacelle
0 2014/03/12 12:15:38
you'll need a small set of plier designed to remove small retainer clips like gold one seen in the pic
you'll need a small set of plier designed to remove small retainer clips like gold one seen in the pic
0 2014/03/12 12:15:38
0 2014/03/12 08:38:00
0 2014/03/12 08:38:00
0 2014/03/12 08:38:00
carlinis front yard angle view
carlinis front yard angle view
0 2014/03/12 08:36:25
RK with carlini
RK with carlini
0 2014/03/12 08:36:25
I chose to stagger-cut existing wires, insert 20" extensions, which allowed me to use the existing molex without taking the old wires out and replacing with the new wires. In the end it was more work on my part, but I was having trouble with the molexes. 23 wires total, 46 soldered connections.
I chose to stagger-cut existing wires, insert 20" extensions, which allowed me to use the existing molex without taking the old wires out and replacing with the new wires. In the end it was more work on my part, but I was having trouble with the molexes. 23 wires total, 46 soldered connections.
0 2014/03/12 08:36:25
Mustang
Mustang
0 2014/04/03 10:09:23
Shiny
Shiny
0 2014/04/03 10:09:23
2010 Road King
2010 Road King
0 2014/04/03 09:58:43
16" Carlini Gangsters on a 2010 RK
16" Carlini Gangsters on a 2010 RK
0 2014/04/03 09:48:10
1978 Yamaha 650 Special
1978 Yamaha 650 Special
0 2012/03/06 09:05:40
2010 Road King
2010 Road King
0 2012/02/23 12:28:16
2010 Road King & 1996 Sportster 1200 Custom
2010 Road King & 1996 Sportster 1200 Custom
0 2012/02/23 12:27:07
1996 Sportster 1200 Custom
1996 Sportster 1200 Custom
0 2012/02/12 17:51:27
1996 Sportster 1200 Custom
1996 Sportster 1200 Custom
0 2012/02/12 17:51:27
1996 Sporster 1200 Custom
1996 Sporster 1200 Custom
0 2012/01/30 09:54:40
 
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands