Harley Davidson Forums
0 2021/04/06 14:15:42
0 2021/02/13 15:34:22
I was originally going to do rivets to hold on the medallion but ended up drilling and tapping the holes and using button head screws. The five star pattern kind of matches the five bolt pattern on the timing cover.
I was originally going to do rivets to hold on the medallion but ended up drilling and tapping the holes and using button head screws. The five star pattern kind of matches the five bolt pattern on the timing cover.
0 2021/02/08 19:26:43
I cut a piece of mesh type material I found at a hardware store for behind the medallion.
I cut a piece of mesh type material I found at a hardware store for behind the medallion.
0 2021/02/08 19:26:41
Here’s the pattern for the medallion.
Here’s the pattern for the medallion.
0 2021/02/08 19:26:39
I picked up a couple of stainless sauce pans from the local Goodwill. One for the main body and another to build the medallion. I cut both pieces with a plasma cutter. I had a jig in the center hole with an arm to hold the plasma cutter to make a circle. The main part of the air cleaner needed to be cut shorter to clear the backing plate.
I picked up a couple of stainless sauce pans from the local Goodwill. One for the main body and another to build the medallion. I cut both pieces with a plasma cutter. I had a jig in the center hole with an arm to hold the plasma cutter to make a circle. The main part of the air cleaner needed to be cut shorter to clear the backing plate.
0 2021/02/08 19:26:36
Black Hills HD parking lot during Sturgis 2017 Rally
Black Hills HD parking lot during Sturgis 2017 Rally
0 2021/02/06 19:10:12
I made this from a stainless Revere ware sauce pan.
I made this from a stainless Revere ware sauce pan.
0 2021/02/06 14:07:50
Renthal low road bars on 2017 xg750a
Renthal low road bars on 2017 xg750a
0 2020/12/08 10:16:40
0 2020/11/19 17:42:56
0 2020/11/19 17:42:54
Facebook marketplace has one in Lincoln, Ne for $150. It doesn’t mention what size it is though. Might be worth a shot.
Facebook marketplace has one in Lincoln, Ne for $150. It doesn’t mention what size it is though. Might be worth a shot.
0 2020/11/14 05:49:09
0 2020/11/01 12:49:50
My wife’s Street Rod 750
My wife’s Street Rod 750
0 2020/11/01 12:49:45
I’ve got one that was on a 2007 Sportster. I’d do $10 plus shipping CONUS.
I’ve got one that was on a 2007 Sportster. I’d do $10 plus shipping CONUS.
0 2020/10/17 20:17:02
I can’t tell for sure the exact route you’re taking. If you can work in 89A near Prescott, you won’t be disappointed. It’d be a shame to be that close to it and miss that ride.
I can’t tell for sure the exact route you’re taking. If you can work in 89A near Prescott, you won’t be disappointed. It’d be a shame to be that close to it and miss that ride.
0 2020/10/09 15:02:37
Right side Amazon mirror clamp Mount.
Right side Amazon mirror clamp Mount.
0 2020/09/01 20:56:46
0 2020/09/01 20:55:15
Renthal low road bars
Renthal low road bars
0 2020/09/01 20:55:12
0 2020/05/03 18:48:06
0 2020/05/03 18:47:47
0 2020/03/24 08:23:06
0 2020/03/19 22:02:22
0 2020/03/19 12:24:27
0 2020/03/19 12:24:20
0 2020/03/19 12:24:13
0 2020/03/19 12:24:05
0 2020/03/19 12:23:59
0 2020/03/19 12:23:51
0 2020/03/19 12:23:44
0 2020/03/03 19:12:54
0 2020/03/03 19:12:47
0 2020/03/03 19:12:40
Here’s the pieces I didn’t use
Here’s the pieces I didn’t use
0 2020/03/02 22:57:02
Here’s the kit
Here’s the kit
0 2020/03/02 22:56:20
I cut off the tabs that hold the wiring on the top of the headlight and it slid right in there. I used the Velcro that came with the amp to secure it to the headlight.
I cut off the tabs that hold the wiring on the top of the headlight and it slid right in there. I used the Velcro that came with the amp to secure it to the headlight.
0 2020/03/02 10:15:38
0 2020/03/02 10:15:30
0 2020/02/22 09:01:18
0 2020/02/22 09:00:34
I’m just checking in here before I button things up. I’ve got the MMATS PA601cx speakers, Stinger SPX700x4. Here’s where I’m at on the settings (see pic). With a 1k hz tone I’m reading 7.11 volts across the speaker lead from the back of the amp while the bike is running. I did the calculation
I’m just checking in here before I button things up. I’ve got the MMATS PA601cx speakers, Stinger SPX700x4. Here’s where I’m at on the settings (see pic). With a 1k hz tone I’m reading 7.11 volts across the speaker lead from the back of the amp while the bike is running. I did the calculation
0 2020/02/22 08:51:59
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands