Harley Davidson Forums
0 2022/01/13 19:47:22
0 2022/01/13 19:46:24
settled debris
settled debris
0 2022/01/13 19:37:58
0 2021/11/24 16:57:50
0 2021/11/24 16:53:40
0 2021/11/12 09:29:09
0 2021/11/12 09:26:36
0 2021/11/12 09:19:46
0 2021/11/12 09:13:37
0 2021/11/12 09:12:53
0 2021/09/23 20:19:13
0 2020/09/29 20:41:18
Motorcycle secure bar for chain & your front wheel. Underneath
Motorcycle secure bar for chain & your front wheel. Underneath
0 2020/09/29 20:30:18
Motorcycle secure bar for chain & your front wheel.
Motorcycle secure bar for chain & your front wheel.
0 2020/09/29 20:28:29
0 2020/09/21 06:49:11
0 2020/09/21 06:43:01
0 2020/05/20 15:19:36
Much bigger oil ports & expensive coated 30mm Road & Track piston
Much bigger oil ports & expensive coated 30mm Road & Track piston
0 2020/05/05 04:53:50
Piston Size Compairson Left to Right *20mm Premium HD Cartridge * 20mm Ohlins replacement * 25mm non-adjustable Ohlins * 30mm R&T Ohlins
Piston Size Compairson Left to Right *20mm Premium HD Cartridge * 20mm Ohlins replacement * 25mm non-adjustable Ohlins * 30mm R&T Ohlins
0 2020/05/05 04:42:51
30mm Road & Track Cartridge.
30mm Road & Track Cartridge.
0 2020/05/05 04:25:49
30mm Road & Track Cartridge.
30mm Road & Track Cartridge.
0 2020/05/05 04:21:37
rebound side of 30mm piston Street
rebound side of 30mm piston Street
0 2020/05/05 04:14:02
Compression side of 30mm piston Street
Compression side of 30mm piston Street
0 2020/05/05 04:13:13
No top out spring and less exotic piston holder and needle valving passageways.
No top out spring and less exotic piston holder and needle valving passageways.
0 2020/05/05 04:09:49
0 2020/04/12 19:17:28
0 2020/04/02 10:55:05
0 2020/03/12 15:44:12
7. Remount the spring using a spring compressor. All is checked by this specification sheet I designed.
7. Remount the spring using a spring compressor. All is checked by this specification sheet I designed.
0 2020/03/12 15:36:07
6. Nitrogen Tank with regulator.
6. Nitrogen Tank with regulator.
0 2020/03/12 15:35:01
5. With the (#3) shaft, piston nut, piston, and the seal head assembly inserted back into the shock body the shock is then re-charged with nitrogen.
5. With the (#3) shaft, piston nut, piston, and the seal head assembly inserted back into the shock body the shock is then re-charged with nitrogen.
0 2020/03/12 15:30:37
4. These are shims and are on the compression side. Shims come in different thicknesses, diameter, and shaft hole sizes.
4. These are shims and are on the compression side. Shims come in different thicknesses, diameter, and shaft hole sizes.
0 2020/03/12 15:27:08
3. Clamp the shaft than remove the piston nut, piston, than the compression side shims to re-valve the shock. Notice the build sheet of every item in the shock and new shim pack to be used. This is my own design on how to make a shock to work the way I want it to.
3. Clamp the shaft than remove the piston nut, piston, than the compression side shims to re-valve the shock. Notice the build sheet of every item in the shock and new shim pack to be used. This is my own design on how to make a shock to work the way I want it to.
0 2020/03/12 15:22:27
2. Remove the dust seal than remove the snap ring to get the seal head, shaft, piston, and end eye out.
2. Remove the dust seal than remove the snap ring to get the seal head, shaft, piston, and end eye out.
0 2020/03/12 15:20:25
0 2020/03/12 15:19:41
1- Remove the spring than remove the nitrogen charge.
1- Remove the spring than remove the nitrogen charge.
0 2020/03/12 15:17:08
0 2020/03/09 20:55:12
0 2020/03/09 20:44:21
0 2020/02/17 04:09:04
0 2020/01/25 15:16:23
0 2020/01/25 15:15:54
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands