Harley Davidson Forums
Here it is all buttoned back up. Forgot to mention, I did clean my Tmap sensor before starting all this work. What egged me to finally doing it, was, on this mornings ride, it almost stalled at idle, which was an issue I described in another thread. After a call to the dealer, about it being covered under my ESP, they said, it would probably be not covered, as they consider that due to lack of filter maint. So decided to see if this fixes it first.
Here it is all buttoned back up. Forgot to mention, I did clean my Tmap sensor before starting all this work. What egged me to finally doing it, was, on this mornings ride, it almost stalled at idle, which was an issue I described in another thread. After a call to the dealer, about it being covered under my ESP, they said, it would probably be not covered, as they consider that due to lack of filter maint. So decided to see if this fixes it first.
0 2020/08/25 22:04:39
Where the line exits the filter. I zip tied it to the frame, but being rubber, it will flex when the engine shakes, and should not cause any issues, but if it does, its right where I can check it each time I ride.
Where the line exits the filter. I zip tied it to the frame, but being rubber, it will flex when the engine shakes, and should not cause any issues, but if it does, its right where I can check it each time I ride.
0 2020/08/25 22:04:33
You can see the filter (a small fuel filter) the line runs into. It is zip tied to the oil line fittings, not the line itself.
You can see the filter (a small fuel filter) the line runs into. It is zip tied to the oil line fittings, not the line itself.
0 2020/08/25 22:04:26
Here you can see where the tubing exits the front, amd goes over and around the oil filter housing.
Here you can see where the tubing exits the front, amd goes over and around the oil filter housing.
0 2020/08/25 22:01:52
A close up shot of the aluminum tubing that runs to the front of the bike.
A close up shot of the aluminum tubing that runs to the front of the bike.
0 2020/08/25 22:01:46
Here's the backing plate of the SE air cleaner, with my EB lines tucked in behind it.
Here's the backing plate of the SE air cleaner, with my EB lines tucked in behind it.
0 2020/08/25 22:01:40
A shot from under the air cleaner, looking up, where the lines from the two cyl's meet at the T. The line exiting, goes into a 1/4" blackened aluminum tubing, that fits nicely between the cooling fins of the cylinder.
A shot from under the air cleaner, looking up, where the lines from the two cyl's meet at the T. The line exiting, goes into a 1/4" blackened aluminum tubing, that fits nicely between the cooling fins of the cylinder.
0 2020/08/25 21:56:52
This is the brass "T" fitting where the two line meet. This fitting was the most expensive part, at $10, for one.
This is the brass "T" fitting where the two line meet. This fitting was the most expensive part, at $10, for one.
0 2020/08/25 21:56:47
Here tou can see the threaded 1/8"MNPT to 1/4" barb fitting. I used oil resistant hose and spring clamps, throughout.
Here tou can see the threaded 1/8"MNPT to 1/4" barb fitting. I used oil resistant hose and spring clamps, throughout.
0 2020/08/25 21:56:39
0 2020/08/20 21:54:40
Waiting to get bowl of fresh clam chowder.
Waiting to get bowl of fresh clam chowder.
0 2020/08/11 13:34:34
Morro rock, Morro Bay, CA. 32 miles from my front door. This is why I put up with morons in Sacramento.
Morro rock, Morro Bay, CA. 32 miles from my front door. This is why I put up with morons in Sacramento.
0 2020/08/11 13:34:25
Stopped at Mc Donalds today, for a soda. These guys rolled up. Looks like one has a wise old companion to ride with.
Stopped at Mc Donalds today, for a soda. These guys rolled up. Looks like one has a wise old companion to ride with.
0 2020/07/27 14:28:06
0 2020/07/26 20:10:10
Morro Rock on the left, and the abandoned Neuc plant towers on the right. Morro Bay, Ca.
Morro Rock on the left, and the abandoned Neuc plant towers on the right. Morro Bay, Ca.
0 2020/07/22 22:12:36
As you can see, it's more than twice as thick as the metal frame, so it has to be removed. Probably voids my warranty, but I had to do it to make them work. Was not going to send them back and wait for some other set.
As you can see, it's more than twice as thick as the metal frame, so it has to be removed. Probably voids my warranty, but I had to do it to make them work. Was not going to send them back and wait for some other set.
0 2020/07/14 18:46:57
This is how they come to you, with ring attached.
This is how they come to you, with ring attached.
0 2020/07/14 18:45:32
This is the Polk speaker with the ring removed
This is the Polk speaker with the ring removed
0 2020/07/14 18:45:19
This is the old HD speaker. You can see where the cone separated from the rest of the speaker. Explains that very nice vibration noise I was getting half the time.
This is the old HD speaker. You can see where the cone separated from the rest of the speaker. Explains that very nice vibration noise I was getting half the time.
0 2020/07/14 18:34:36
This is where we usually go perch fishing in spring and fall.
This is where we usually go perch fishing in spring and fall.
0 2020/07/13 18:39:03
0 2020/07/13 18:38:57
0 2020/07/13 18:38:50
0 2020/07/13 18:38:45
0 2020/07/13 18:38:40
0 2020/07/13 18:38:33
0 2020/07/11 22:07:54
0 2020/07/09 18:39:00
0 2020/07/08 18:51:48
0 2020/07/08 16:50:17
0 2020/06/17 22:38:07
The sissybar and Viking bags are both quick detach.
The sissybar and Viking bags are both quick detach.
0 2020/06/17 22:38:02
This just shows the distance from the floorboard to the derby cover, about 3/4".
This just shows the distance from the floorboard to the derby cover, about 3/4".
0 2020/06/09 00:35:54
Its hard to tell but the end of the tape is at the back of the bracket, the part that touches the frame its bolted to. Distance is about 4 1/16".
Its hard to tell but the end of the tape is at the back of the bracket, the part that touches the frame its bolted to. Distance is about 4 1/16".
0 2020/06/09 00:35:45
0 2020/05/31 11:45:37
On with the new
On with the new
0 2020/05/28 15:59:11
Off with the old
Off with the old
0 2020/05/28 15:59:01
0 2020/05/27 09:54:35
0 2020/05/18 18:09:55
0 2020/05/18 18:09:37
This is my manual.
This is my manual.
0 2020/05/17 13:18:47
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands