Harley Davidson Forums
tomorrow play with the wiring and fix it as had a fifty fifty chance if I put the terminal boards on right ! Oh well shit happens as the bike was in boxes when I got it back and memory 30 years ago isn't perfect but it's falling in place .
tomorrow play with the wiring and fix it as had a fifty fifty chance if I put the terminal boards on right ! Oh well shit happens as the bike was in boxes when I got it back and memory 30 years ago isn't perfect but it's falling in place .
0 2026/04/27 17:52:53
have to fix the wiring as the rear fender electrical plug is 2 inches short of plugging in so must have the terminal boards backwards up by where the tanks between them .
have to fix the wiring as the rear fender electrical plug is 2 inches short of plugging in so must have the terminal boards backwards up by where the tanks between them .
0 2026/04/27 17:50:04
Putting on the front fender
Putting on the front fender
0 2026/04/27 17:49:15
Put lights and turn signal bar on but the day starting as I forgot to run the wires so take off the fender and run the wires thru the inside tubing in the fender !
Put lights and turn signal bar on but the day starting as I forgot to run the wires so take off the fender and run the wires thru the inside tubing in the fender !
0 2026/04/27 17:47:01
fitting tail light gasket on
fitting tail light gasket on
0 2026/04/27 17:45:51
Rear fender same thing wet sand with 600 then to 800 then to 1500 and buff 3 different compounds wool pad then a yellow wool pad then a foam pad
Rear fender same thing wet sand with 600 then to 800 then to 1500 and buff 3 different compounds wool pad then a yellow wool pad then a foam pad
0 2026/04/27 17:44:00
front fender started out wet sanding with 600 then to 800 then to 1500 then buffing 3 stages
front fender started out wet sanding with 600 then to 800 then to 1500 then buffing 3 stages
0 2026/04/27 17:41:30
Both tanks touched up
Both tanks touched up
0 2026/04/26 18:49:12
Touching up the purple pearl
Touching up the purple pearl
0 2026/04/26 18:47:57
Finally nice to see the paint work done !
Finally nice to see the paint work done !
0 2026/04/26 18:46:59
0 2026/04/26 18:46:43
ghost flames also on the tank
ghost flames also on the tank
0 2026/04/26 18:45:55
look close and you can see the ghost flames as they start from the HD and go back
look close and you can see the ghost flames as they start from the HD and go back
0 2026/04/26 18:44:36
0 2026/04/25 14:19:54
Hard to see the flames
Hard to see the flames
0 2026/04/25 14:17:56
made the seat out of a piece of metal and had my friend do the seat cover leather work ! Jimmy Z . made the rear fender with side marker lights turn signals are from Kirken
made the seat out of a piece of metal and had my friend do the seat cover leather work ! Jimmy Z . made the rear fender with side marker lights turn signals are from Kirken
0 2026/04/25 14:17:40
ghost flames on the big tanks
ghost flames on the big tanks
0 2026/04/25 14:16:51
0 2026/04/25 14:16:29
Candy apple red with ghost flames
Candy apple red with ghost flames
0 2026/04/25 14:16:14
0 2026/04/25 14:15:54
Ready to clear tomorrow as have a little pearl orange to touch up on the front fender and a small silver pinstripe .
Ready to clear tomorrow as have a little pearl orange to touch up on the front fender and a small silver pinstripe .
0 2026/04/25 13:37:56
Glad I still know how to paint with my roller !
Glad I still know how to paint with my roller !
0 2026/04/25 13:37:18
retaping up as did a sand thru
retaping up as did a sand thru
0 2026/04/25 13:36:41
Hard to see but you can see the spacers that I had to make to move the forward controls out to clear the turbo and not incuding the shifter rod on back pictures as well as spacers for that too !
Hard to see but you can see the spacers that I had to make to move the forward controls out to clear the turbo and not incuding the shifter rod on back pictures as well as spacers for that too !
0 2026/04/25 08:54:41
Turbo pain !
Turbo pain !
0 2026/04/25 08:53:45
Didn't relieze that Crane Cams are out of business ! So wiring this back up has been a lot of researching wiring diagrams ! Not been a very production week but it's done and back to painting Saturday !
Didn't relieze that Crane Cams are out of business ! So wiring this back up has been a lot of researching wiring diagrams ! Not been a very production week but it's done and back to painting Saturday !
0 2026/04/24 17:03:04
Well got it all back together and it shifts ! That's what I get for not double checking on stuff as taking it for granted . Now back to the wiring ! as missing a bracket for the relays for the starter and circuit braker as fits between the oil tank and rear fender splash guard as it's made out of stainless
Well got it all back together and it shifts ! That's what I get for not double checking on stuff as taking it for granted . Now back to the wiring ! as missing a bracket for the relays for the starter and circuit braker as fits between the oil tank and rear fender splash guard as it's made out of stainless
0 2026/04/24 16:59:08
It works and time to put all the stuff back on
It works and time to put all the stuff back on
0 2026/04/24 16:58:12
Not much clearance as the rod runs under the horn and the fuel pump and other stuff
Not much clearance as the rod runs under the horn and the fuel pump and other stuff
0 2026/04/24 16:57:09
New spacer as the turbo hits the forward controls so had to make spacers to clear it
New spacer as the turbo hits the forward controls so had to make spacers to clear it
0 2026/04/24 16:55:46
so made some new spacers and took off a little material on the turn buckels as the forward controls are a little different than the original ones that I didn't get back .
so made some new spacers and took off a little material on the turn buckels as the forward controls are a little different than the original ones that I didn't get back .
0 2026/04/24 16:51:55
Built this one at the same time as I was doing my wife's one. Was on the Easy Rider tour in the late 90"s and Sold it to somebody in Houston ,Tx.
Built this one at the same time as I was doing my wife's one. Was on the Easy Rider tour in the late 90"s and Sold it to somebody in Houston ,Tx.
0 2026/04/23 18:25:20
0 2026/04/23 18:25:02
0 2026/04/19 14:50:12
So they match the flames on the tank and front fender so what the hay why not ! They where free from the cabinet !!!LOL
So they match the flames on the tank and front fender so what the hay why not ! They where free from the cabinet !!!LOL
0 2026/04/19 14:48:34
Found these old Arlan Ness foot pegs from about 30 years ago as they have been in the cabinet from one of my other builds that I didn't use
Found these old Arlan Ness foot pegs from about 30 years ago as they have been in the cabinet from one of my other builds that I didn't use
0 2026/04/19 14:46:43
0 2026/04/19 14:46:17
Took them boothof the forward foot controls off and polished them more as they really didn't have the finish as the rest of the aluminium parts
Took them boothof the forward foot controls off and polished them more as they really didn't have the finish as the rest of the aluminium parts
0 2026/04/19 14:44:40
Making sure they fit the controls
Making sure they fit the controls
0 2026/04/19 14:43:45
Just a pain to fix all this stuff !
Just a pain to fix all this stuff !
0 2026/04/19 14:40:04
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands