Fatboy seat removal
#1
Fatboy seat removal
Going to hookup battery tender on my bike but after loosening all 3 seat screws, unable to remove seat.I know to pull rearward but just how hard? Have learned with many years experience that's it's best not to force things. Tends to get expensive when you dont ask or read instructions. Any help is appreciated.
#2
#3
#5
RE: Fatboy seat removal
First time for anything is a little difficult . Make sure that you have the passenger seat off and also the "grab strap". The grab strap can sometimes get in the way. Lossen the screws all the way (so you can't feel them grab anything). I would then put a towel down over the back fender and "drape it" over the sides of the bike. Wiggle the seatback and forth and pull away from the tank. It should come out fairly easily.
Good Luck!
Good Luck!
#6
#7
RE: Fatboy seat removal
ORIGINAL: Cobeslayer
My experience was the same as TinG's. Eventhough backed out all the way, the side screws were the culprit. GENTLY pry one of the sides and you should be good to go.
My experience was the same as TinG's. Eventhough backed out all the way, the side screws were the culprit. GENTLY pry one of the sides and you should be good to go.
BA
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post