gauge mount for tbars?
#1
03-26-2014, 01:43 PM
Join Date: Nov 2013
Location: Michigan
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
#2
03-26-2014, 02:08 PM
Cruiser
Join Date: Sep 2007
Location: Santa Clara, CA
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
#3
03-26-2014, 02:24 PM
Join Date: Nov 2013
Location: Michigan
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
#4
03-26-2014, 03:56 PM
Join Date: Nov 2013
Location: Michigan
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
#6
03-26-2014, 04:51 PM
You can also mount them using Motion Pro clutch cable clamps. They're black and you can position them however you need to fit. They cost around $40 each. An Accutronix t-bar mount is around a $100.
As for the gauge cups and such, you can find them used on ebay/facebook or buy OEM from the dealer. I started collecting parts for a single (combo tach/speedo) mount and got an OEM mount for a sporty. I haven't moved forward with it yet because I haven't figured out a solution for the gaping hole it will leave in my dash.
As for the gauge cups and such, you can find them used on ebay/facebook or buy OEM from the dealer. I started collecting parts for a single (combo tach/speedo) mount and got an OEM mount for a sporty. I haven't moved forward with it yet because I haven't figured out a solution for the gaping hole it will leave in my dash.
#7
03-26-2014, 06:02 PM
You can also mount them using Motion Pro clutch cable clamps. They're black and you can position them however you need to fit. They cost around $40 each. An Accutronix t-bar mount is around a $100.
As for the gauge cups and such, you can find them used on ebay/facebook or buy OEM from the dealer. I started collecting parts for a single (combo tach/speedo) mount and got an OEM mount for a sporty. I haven't moved forward with it yet because I haven't figured out a solution for the gaping hole it will leave in my dash.
As for the gauge cups and such, you can find them used on ebay/facebook or buy OEM from the dealer. I started collecting parts for a single (combo tach/speedo) mount and got an OEM mount for a sporty. I haven't moved forward with it yet because I haven't figured out a solution for the gaping hole it will leave in my dash.
http://www.jpcycles.com/product/7400283 for 1 1/4 bars or http://www.jpcycles.com/product/7400281 for 1 inch bars
Last edited by sonnydaze; 03-26-2014 at 06:07 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
VipeRtBlck
Ignition/Tuner/ECM/Fuel Injection
0
04-11-2011 05:18 PM