Looking to upgrade my 88ci Roadking custom
#1
Looking to upgrade my 88ci Roadking custom
Hey brothers I am looking to do some motor work on my sled as the Ole girl is only and 88ci and all the other bikes I ride with are always leaving me in the dust.
Looking to start with a new SE cam tensioner and oil pump with a cam as well, just don't know what cam to use. Looking for any input as to what you guys are running and how it performs.
Thanks,
Scooter
Looking to start with a new SE cam tensioner and oil pump with a cam as well, just don't know what cam to use. Looking for any input as to what you guys are running and how it performs.
Thanks,
Scooter
#4
Torque being the paramount need in that touring machine, we'd suggest yes, boring to 98", our Stage I or II Head, and the use of Andrews 26 cams, set at 9.65 cr, for example.
BIG torque rip off the bottom and mid range, just the ticket for a bike like yours.
Scott
BIG torque rip off the bottom and mid range, just the ticket for a bike like yours.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
The following users liked this post:
bigheadted (04-04-2016)
Thread
Thread Starter
Forum
Replies
Last Post