New 107 build and still needs cams. Cylinders and new pistons, 10.5cr, are ready for install. Ported 110 heads ready also. Porting done by Greg Dahl. Now for cams I am considering either S&S 585 or Tman 625. Give me some opinions or I flip a coin.

 

We all need to know the chamber volume first. And head gasket.

 

You'll need a domed piston with that 110" head on that 107" with either cam.
The .585 would/should show more of an hp charge, and the .625 should hit harder off the bottom-mid.
Scott

 

If you have a true 10.5 static and the heads are setup for the lift; TMan 625.

 

.170 dome on piston
.030 head gasket

 

What djl said.
Scott

 

I ran the 625 in a 103 Stage IV engine and it performed very well. I have had more than one cam from TR and can attest to their performance.

Jim

 

What did Greg recommend for cam. The S&S 585 with SE 1.725 rockers on the intake side only works great with that or slightly higher compression.