Go Back   Harley Davidson Forums > General Harley Davidson Forums > General Harley Davidson Chat
Sign in using an external account
Register Forgot Password?
Search

General Harley Davidson Chat Forum to discuss general Harley Davidson issues, topics, and experiences.
Sponsored by: J&P Cycles

Reply
 
 
 
P
 
Thread Tools Search this Thread
  #1  
Old 02-09-2009, 06:41 PM
golfblues's Avatar
golfblues golfblues is offline
Ultimate HDF Member
Join Date: Sep 2007
Location: Lower Hudson Valley, NY
Posts: 5,637
Default Resetting the Security Module.....

2009 Heritage Smart Security
Anyone know the sequence. I installed LED's & arming the alarm is a little funky. It is supposed to chirp twice when arming but now it takes 2 or 3 sets of chirps before it arms. I was told to reset the Security module by Custom Dynamics but can't get past the right blinker switch setting in step 4. Everything else works fine:

17) How do you reset the TSSM Security module on 2001 and newer Harley Davidsons?
Please be sure load equalizer module is properly installed.
  1. Be sure run/off switch is in the off position.
  2. Turn ignition key switch on, off, on, off, then on.
  3. Quickly, depress left turn signal switch and release, repeat. Turn signal indicators will flash 1-3 times, do not continue unless turn signals respond.
  4. Depress right turn signal switch and release. Your turn signal indicator light will flash 1 time.
  5. Depress right turn signal switch and release. Your turn signal indicator light will flash 2 times.
  6. Depress right turn signal switch and release. Your turn signal indicator light will flash 3 times.
  7. Depress left turn signal switch and release. Your turn signal indicators will flash trouble codes.
  8. Depress and hold left turn signal for 4 to 5 seconds until turn signal indicator flashes twice.
  9. Turn ignition key switch to off position.
__________________









Reply With Quote
  #2  
Old 02-09-2009, 07:33 PM
golfblues's Avatar
golfblues golfblues is offline
Ultimate HDF Member
Join Date: Sep 2007
Location: Lower Hudson Valley, NY
Posts: 5,637
Default

Btt......
__________________









Reply With Quote
  #3  
Old 02-09-2009, 10:37 PM
Mr. Lucky's Avatar
Mr. Lucky Mr. Lucky is offline
Outstanding HDF Member
Join Date: Mar 2008
Location: SoCal via Mass.
Posts: 2,114
Send a message via Skype™ to Mr. Lucky
Default

Did you get the type equalizer intended for self-cancelling turn signals, and do your blinkers flash at a normal rate?
__________________
http://www.hdforums.com/forum/image.php?type=sigpic&userid=55882&dateline=122801  2109
Reply With Quote
  #4  
Old 02-09-2009, 11:29 PM
golfblues's Avatar
golfblues golfblues is offline
Ultimate HDF Member
Join Date: Sep 2007
Location: Lower Hudson Valley, NY
Posts: 5,637
Default

Quote:
Originally Posted by Mr. Lucky View Post
Did you get the type equalizer intended for self-cancelling turn signals, and do your blinkers flash at a normal rate?

I got the one below. I also have the HD Run/Turn/Brake module. It all works fine including the blinkers. I changed to smoke lenses & all led's. I also did the fender tip lights & converted the rear tip light to a run/brake light. I previously installed the Panacea system on my 06 & all is well with that one. The 09 does what it supposed to except for the quirky arming of the alarm.

Street Magic Signal Stabilizer (Load Equalizer)
Fits Harley Davidson from 1991 to Present Plug and Play on '96-'09 Softails, '97-'09 Dynas, Dressers, Road Kings, and '99-'03 Sportsters.
Simple Posi-Tap on All V-Rods and '04 and New XLs Alarm Compatible, No Heat, No Load, 100% Waterproof 5 Year Manufacture Warranty Installation Instructions ITEM#: Signal_Stabilizer http://www.customdynamics.com/loadequalizer.htm
__________________










Last edited by golfblues; 02-11-2009 at 06:53 PM..
Reply With Quote
  #5  
Old 02-11-2009, 06:53 PM
golfblues's Avatar
golfblues golfblues is offline
Ultimate HDF Member
Join Date: Sep 2007
Location: Lower Hudson Valley, NY
Posts: 5,637
Default

I still have a delay with arming the system The LED's, blinkers & brake lights all work properly but it takes 2 or 3 cycles of double chirps for the alarm to set. Custom Dynamics is still looking into it. Anyone got a clue?
__________________









Reply With Quote
  #6  
Old 06-15-2010, 12:18 AM
Fattire_Biker's Avatar
Fattire_Biker Fattire_Biker is offline
One Of The Regulars
Join Date: May 2010
Location: So CA
Posts: 152
Default

I installed the Custom Dynamics front and rear LED signal lights along with the run/turn/brake module. My signal lights blink at a very fast rate. I've tried the method that they outline (that you posted above) several times. I can't get past the 4th step either. Rather than resetting the TSSM. Following their steps it puts me into re-programing the PIN for the alarm system. I called them and they stated that if the first method doesn't work to try this.... Turn on the left signal for 2 blinks, turn on the right signal for 2 blinks, turn on the left signal for at least 10 blinks and finally turn on the right signal for at least 10 blinks. This didn't work for me either.

I just stumbled across another thread this evening suggesting disconnecting the battery for several minutes. For what it's worth, I am going to give that a try as I ain't having much luck otherwise. Hope you have better luck.
Reply With Quote
Old 06-15-2010, 12:18 AM
 
 
 
P
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Alarm/Anti-theft system problems t020673 Dyna Glide Models 2 09-28-2014 11:43 PM
How to retrieve security pin 01 FXDL /Key FOB has button justmealwatts Ignition/Tuner/ECM/Fuel Injection 0 04-06-2013 01:28 PM
Crossbones Turnsignals Cbones Softail Models 0 08-30-2012 03:34 AM
Programming/ Using Manual Security Code (Both FOB'S) '10 Wide Glide Dyna Glide Models 5 05-02-2011 02:28 PM
Checking TSM/TSSM Trouble Codes HDF Tech Ignition/Tuner/ECM/Fuel Injection 0 03-10-2006 10:54 AM


Tags
2007, 2008, custom, davidson, dynamics, harley, lights, module, reset, resetting, security, signal, system, turn, work


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Join HDForums

Advertising
Featured Sponsors
Vendor Directory
Sponsors

All times are GMT -5. The time now is 01:10 AM.


© Internet Brands, Inc.