Intake Air Temp sensor....where?
#1
Intake Air Temp sensor....where?
Where is it exactly? I can't find anything on it in the service manual.
I'm getting an occasional code P0113 IAT Sensor Voltage Open/High EFI
I can't find anything that says where it is so I can clean it and check the connections. Can some one point em in the right direction?
Thanks!
I'm getting an occasional code P0113 IAT Sensor Voltage Open/High EFI
I can't find anything that says where it is so I can clean it and check the connections. Can some one point em in the right direction?
Thanks!
#5
P0113 Code
Unhooked sensors and, cleaned and put elec grease on them. Clean throttle body throughly. Yes, I "truly" have a k & n and I would disagree on whether or not my mechanic is a "mechanic". He is a master tech. Though I agree that he should have oiled my filter. Removed seat, cut open heat wrap and looked at pin 7 and 26 on the ECM. All is good. Started bike and and after letting idle for a min, took a flat head screwdriver and pushed down on green/yellow / black white wires coming out of IAC and "boom", threw the code. Cleared code and repeated process. Threw code again. I was pushing down on wires with screwdriver so my best guess is lose wire inside the part that fits inside the sensor. So, off to the shop she goes. There's very little wire to work with so I'm goinng to let the shop handle this one. At least I found where the problem is so that will save me $$$, as they wont have to try and run issue down. Thanks for all of the feedback.
Thread
Thread Starter
Forum
Replies
Last Post
KennyPowerz
General Topics/Tech Tips
6
06-06-2018 10:30 AM
tuckerbeer01
General Harley Davidson Chat
2
06-10-2010 05:14 PM