103 High Output Breather
#1
103 High Output Breather
Does anyone have any flow #s on these breathers? I know they aren't going to flow as good as a SE stage 1, but I really like the looks of them. Maybe a stage 1 with the 103 Breather cover? Just going to be doing slip ons and Breather for right now, nothing too extreme. Already have PCV
#2
the 2013 style flows about 160 CFM- the Rushmore is advertised as flowing 15% more...so 180 ish
the S/E and Ness usually flow about 250 which is more than the motor can demand
the large gain is not so much the filter media or the lack of a seal to the backing plate, but the air horn cast into the high flow backing plates.
bang for buck if you do want a high flow is the ness big sucker, about $120 on ebay from easternpc
this is for the chrome backing plate version which complements the black and chrome motor, the ness is an easier install too- the throttle body brace stays in place
Mike
the S/E and Ness usually flow about 250 which is more than the motor can demand
the large gain is not so much the filter media or the lack of a seal to the backing plate, but the air horn cast into the high flow backing plates.
bang for buck if you do want a high flow is the ness big sucker, about $120 on ebay from easternpc
this is for the chrome backing plate version which complements the black and chrome motor, the ness is an easier install too- the throttle body brace stays in place
Mike
Last edited by mkguitar; 11-30-2015 at 11:46 AM.
#3
Thread
Thread Starter
Forum
Replies
Last Post