2020 Low Rider S owners
#1071
The Street Bob housing works for our FXLRS. I didn't use the trim ring below, I bought the Defiance collection trim ring.
67700380 Black housing
12400155 spacer ring
61400574 black trim ring
OldMike posted a diagram above at post 974 and B2inUT posted a link to partsfinder at Ronnie's Harley at post 970.
67700380 Black housing
12400155 spacer ring
61400574 black trim ring
OldMike posted a diagram above at post 974 and B2inUT posted a link to partsfinder at Ronnie's Harley at post 970.
Question, does the 'spacer' change the mounting bracket position?
#1072
Baseballbeck17, correct, the bucket doesn't mount to the frame, it clamps to the headlight rim, kind of sandwiched with the trim ring. You can see the opening in my picture of the bucket in post 1063. It would only work with a different headlight that attaches to that same chrome clamp you see protruding out of the bottom opening.
nightsterept, this bucket and trim ring clamps to the headlight itself and leaves that chrome clamp protruding. The "spacer ring" is just a rubber grommet, I'm not sure why Harley named it that. I would think that you could now use the Memphis Shades headlight extension block to position the headlight correctly without using their trim ring/shroud for example. I used the Defiance collection trim ring, 61400431 instead of the ring listed above.
nightsterept, this bucket and trim ring clamps to the headlight itself and leaves that chrome clamp protruding. The "spacer ring" is just a rubber grommet, I'm not sure why Harley named it that. I would think that you could now use the Memphis Shades headlight extension block to position the headlight correctly without using their trim ring/shroud for example. I used the Defiance collection trim ring, 61400431 instead of the ring listed above.
#1073
#1074
The following 7 users liked this post by alpneus:
Guglielmo Marconi (05-18-2020),
Lorecapo (05-18-2020),
Mart (05-18-2020),
OldMike (05-18-2020),
rauchman (02-11-2021),
and 2 others liked this post.
#1075
Just wanting to double check been searching around a bit....
Ordered some Bung King 10" risers with 2" pullback, and going to run stock bars for now.
What extensions do I need? Best I can find is like +4 on a brake line and thats it. Just want to make sure.
Thanks in advance.
Ordered some Bung King 10" risers with 2" pullback, and going to run stock bars for now.
What extensions do I need? Best I can find is like +4 on a brake line and thats it. Just want to make sure.
Thanks in advance.
Unfortunately it's out of stock at the moment...
Please post your risers once you'll have them, because I'm interested in the same configuration and I'd like to see them.
#1076
Friends, I need a piece of advice....
In my other two bikes (Sportster and Super Glide) I have Screamin' Eagle II mufflers (from the 90's) on the bikes and I like the sounding of them.
I recently put an order for a Rinehart mufflers for the Low Rider S at J&P and yesterday they emailed me telling that the product is out of stock and they told that I could either wait or cancel the order.
I looked at other options, and they do have S&S slash cut race mufflers in stock.....
Should I wait for the Rinehart or go with the S&S?
In my other two bikes (Sportster and Super Glide) I have Screamin' Eagle II mufflers (from the 90's) on the bikes and I like the sounding of them.
I recently put an order for a Rinehart mufflers for the Low Rider S at J&P and yesterday they emailed me telling that the product is out of stock and they told that I could either wait or cancel the order.
I looked at other options, and they do have S&S slash cut race mufflers in stock.....
Should I wait for the Rinehart or go with the S&S?
#1077
Friends, I need a piece of advice....
In my other two bikes (Sportster and Super Glide) I have Screamin' Eagle II mufflers (from the 90's) on the bikes and I like the sounding of them.
I recently put an order for a Rinehart mufflers for the Low Rider S at J&P and yesterday they emailed me telling that the product is out of stock and they told that I could either wait or cancel the order.
I looked at other options, and they do have S&S slash cut race mufflers in stock.....
Should I wait for the Rinehart or go with the S&S?
In my other two bikes (Sportster and Super Glide) I have Screamin' Eagle II mufflers (from the 90's) on the bikes and I like the sounding of them.
I recently put an order for a Rinehart mufflers for the Low Rider S at J&P and yesterday they emailed me telling that the product is out of stock and they told that I could either wait or cancel the order.
I looked at other options, and they do have S&S slash cut race mufflers in stock.....
Should I wait for the Rinehart or go with the S&S?
#1079
#1080