2020 Low Rider S owners
#1141
The following 7 users liked this post by The_un.welcome:
6113_ (06-17-2020),
A1A (06-22-2020),
FattyMcJ (06-19-2020),
JasonDeezy (06-18-2020),
OldMike (06-18-2020),
and 2 others liked this post.
#1142
Could you post a couple of pictures please? I am seriously considering using 6 or 8" risers with the stock bars, because I think I will like the looks better. Thanks.
#1143
Thanks!
EDIT: Already found at post around #300, dont know how to delete this post...
Last edited by masi; 06-18-2020 at 12:32 PM. Reason: Found photos at a post around #300
#1144
The following 6 users liked this post by big ron:
FattyMcJ (06-19-2020),
Lorecapo (06-19-2020),
rauchman (02-11-2021),
secular (06-19-2020),
TiagoFXLRS (06-19-2020),
and 1 others liked this post.
#1145
The following 3 users liked this post by Lu:
#1146
I finally got around to doing the stage 1 tune, using the hd tuner. I have done 2 smart tune runs on the bike, everything runs fine except idle after it has warmed up a bit. When I come to a stop the bike idles as it did before, then it will bump up on the rpms a bit, not much maybe 50 rpm. and the tach looks like it sits right at 1000 when it happens, before that, its just a hair under, maybe 950. I was watching the screamin eagle tune videos and it shows idle rpm setting, but its not in the software, I'm guessing the videos are a bit old, and I am extremely hesitant to start messing with any of the data cells!
Is this normal after the tune?
Thanks,
Mark
Is this normal after the tune?
Thanks,
Mark
#1147
I finally got around to doing the stage 1 tune, using the hd tuner. I have done 2 smart tune runs on the bike, everything runs fine except idle after it has warmed up a bit. When I come to a stop the bike idles as it did before, then it will bump up on the rpms a bit, not much maybe 50 rpm. and the tach looks like it sits right at 1000 when it happens, before that, its just a hair under, maybe 950. I was watching the screamin eagle tune videos and it shows idle rpm setting, but its not in the software, I'm guessing the videos are a bit old, and I am extremely hesitant to start messing with any of the data cells!
Is this normal after the tune?
Thanks,
Mark
Is this normal after the tune?
Thanks,
Mark
#1148
#1149
There’s shop in Germany called ThunderBike.
They build some pretty awesome custom bikes too.
Check out their risers.
https://shop.thunderbike.de/en/Thund...s-Accessories/
Here’s their custom Softails.
https://www.thunderbike.com/customs/softail-en/