2020 Low Rider S owners
#2031
it could be an extra point in addition to a higher saddle to improve the position
#2032
If you are used to floorboards, get a mini floorboard, get one with more rubber coverage than mine.
#2033
They look like they don't stick out as far as the stock pegs. Is that the case? If so there should be a slight increase in ground clearance.
#2034
#2035
more ground clearance would mean higher peg/ floor boards resulting in higher foot height. Something you don’t want as foot height is one of the biggest hurdles with these bikes as far as comfort. No?
#2036
thanks you all for your answers, I 'm just looking after the best conditions to adjust my position on the bike and I would avoid doing any mistake, mini flootboards are nice but the HD ones for pilot are no more available and someone above in this thread said that the mini footboards from Trashin are higher than the stock pegs, so it's not a good solution ?
#2037
thanks you all for your answers, I 'm just looking after the best conditions to adjust my position on the bike and I would avoid doing any mistake, mini flootboards are nice but the HD ones for pilot are no more available and someone above in this thread said that the mini footboards from Trashin are higher than the stock pegs, so it's not a good solution ?
#2038
The following users liked this post:
Durham man (07-21-2023)
#2039
#2040
I also recently went from the tall boy seat to the saddlemen explorer. It also raises you up but locks you in. Something to consider if you are going with 5.5 pull back risers. 5.5 with the tall boy seat you will still be reaching.The tall boy seat will rub your fender a little as it is very wide. Rub marks did buff out. Just a heads up.
Last edited by Durham man; 07-21-2023 at 06:45 AM.