https://i26.photobucket.com/albums/c...pszmxynupv.jpg
where'd these breather banjos come from. i want to replace mine with something like these or with a nipple to run to a filter. i think the blow by on my sporty is messing with my tps. and i want to do the same on my dyna. |
No banjos in that pic. They're just breather bolts from Lowbrow Customs. He's got several styles. I looked high and low for some that weren't too flashy AND were made of steel. I knew I was hanging some weight (so to speak) on them and didn't want to worry about aluminum fatiguing.
http://www.lowbrowcustoms.com/ |
I also considered the Kuryakyn Bluegrass banjos but really didn't want the extra clutter.
https://cimg5.ibsrv.net/gimg/www.hdf...0e5573910a.jpg |
Originally Posted by cggorman
(Post 15179367)
I also considered the Kuryakyn Bluegrass banjos but really didn't want the extra clutter.
http://www.cruisercustomizing.com/im..._20319_300.jpg Except for a few pieces... Kuryakyn and Klutter could be used interchangeably...imo, of course |
Yeah. I took about 50 lbs (no exaggeration) of chrome off this bike. A lot of it was Kury. Practically the entire engine/trans was covered in it. No wonder the PO had to install an oil cooler. Poor thing was suffocating in a blanket of stagnant air covered with chrome.
|
I can't even imagine installing a chrome slider COVER...chrome sliders is one thing, but a COVER? :icon_nut:
And to all the Chrome COVER wearers out there...:icon_hide: |
not speaking for everyone, but i am waiting for the final photos of the build. LMAO
|
Sorry, I've been slacking. Between the recent heat wave, son's graduation, and the holiday, I haven't been real available or motivated.
I promise the bike isn't really anything that special. HrdNox's bike makes mine look like garbage! Mine is a mismatched mess this season, or until I can scrape together the parts for the front half. Even when I roll it out of the garage this season, it'll still only be about half done. I got the bars mostly done: https://www.hdforums.com/forum/dyna-...onnectors.html Hopefully it's not too hot in the garage tonight and I can get them finished. I'll snap some pics regardless. I did get a new helmet and made a basic mod to it... |
Originally Posted by cggorman
(Post 15198342)
... Between the recent heat wave...
Hopefully it's not too hot in the garage tonight and I can get them finished. |
Nice looking build.
Subscribed. Mike. |
All times are GMT -5. The time now is 10:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands