Who has forward controls and left the midset pegs in place?
#12
RE: Who has forward controls and left the midset pegs in place?
Ok with the HD set it comes with a plug and then you bolt the thru shifter in place. So why do all the dealers say its a remove the inner and outter primary to put them on .
And Kuryakan i was told you don't have to remove the primary?
I need some info as i will be doing the project before spring which is the best set to buy and why? What is the best way to do it?
Shoot me links from in here or lets here some opinions.
And Kuryakan i was told you don't have to remove the primary?
I need some info as i will be doing the project before spring which is the best set to buy and why? What is the best way to do it?
Shoot me links from in here or lets here some opinions.
#13
#14
#16
#18
RE: Who has forward controls and left the midset pegs in place?
Hello I have both and had no problems, clearance was close but no problems and it works. I leave midpegs up when not in use so ankles don't get caught with the stop and go. Is good to have both for long rides to switch back and forth so legs don't cramp up. 06 FXDBI
[IMG]local://upfiles/30471/ADB9F0C12D7C410D966F0905C6D06BA8.jpg[/IMG]
[IMG]local://upfiles/30471/ADB9F0C12D7C410D966F0905C6D06BA8.jpg[/IMG]
#19
RE: Who has forward controls and left the midset pegs in place?
I left mine on until I switched to floor boards. I had also cut about one inch off the mid foot pegs. That still give me a good place to rest my foot and then I did not catch my leg as bad when stoping when my feet were on the forwards.
Jim
Jim
Thread
Thread Starter
Forum
Replies
Last Post
EricInNCa
Dyna Glide Models
19
12-17-2013 09:02 PM