Here is a pic of my 14" Gimps...

[IMG]local://upfiles/34290/3EC43B3321914F5086234F8E99C55EA6.jpg[/IMG]

 

Rok , before you order the poly bushings you may want to look them up due to the fact that they may not fit.

Poly bushings part #56165-03 fits 86 and later dyna (exc. FXDB) . This is right off the package.
They fit my bike, I have an 06 FXDBI.Maybe there is some difference with the risers. I think they are integrated into the tree.
Just a heads up you may want to check with the dealer.

 

Thanks for the heads-up! However, I am aware that the HD bushings are advertised not to fit the Bob - I went with a set from Drag Specialties, per advice of other Bob owners on this forum.

 

Guys, thanks a lot for all the feedback and tips. I will be ordering up the 14" inchers here soon and will post pics as soon as everything is put back together...

 

I,m running 14s on 4-1/2' risers.These bars are really comfortable.I internally wired mine but it is tough with the sharp bend at the bottom(but very doable).Just lube up your wire bundle and take your time.I actually shrink wrapped the whole harness to make it somewhat easier to slide.If your gonna do the wiring yourself I,d recommend going to an electrical supplier and gettin the wire yourself verses using the kits.It's cheaper and you can eliminate one connection point by doing it this way.

 

Definitely go to the supply house. I'm an electrician and it's really simple to splice and solder and shrink tube up your own wiring harness. If I go taller in the future, I would fabricate my own harness. If your a nice guy the supply house may give you some short wire cuts for free. Nice idea to shrink the whole harness. I just taped the whole harness with double wide 3M
super 33 splicing tape.