JIMS Dyna Ignition Switch/Fork Lock Tool 778, $48 new, sell for $25 (picture at website) <https://smile.amazon.com/gp/product/B0068FVD52/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1>

Heartland Prod. 25mm Wheel Bearing Installer/Puller for Twin Cam Sportster V-Rod, $100 new, sell for $50. Change those bearings at *EVERY* tire change! <https://smile.amazon.com/gp/product/B008R15JAK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1>

A set of slash cut Screaming Eagle II slip-ons. Came off my '98 FXD, and will probably fit up to '05. The original owner of the bike (I bought it from him) got them new in '98. $50 plus shipping cost (they're heavy, so figure at least $20). They need to be cleaned up and there is a little pitting, hence the cheap price.

Primary drive locking bar, '06 and up Dyna's, sell for $15 <http://www.georges-garage.com/trans_06_up.htm>

Inner cam bearing installer/puller, should work on all twin cam bikes. $80+ new, sell for $40. (the picture doesn't have the 't-bar' in it, but it's included. It has surface rust here and there, and looks much worse in the pictures than it really is. It's only surface rust and can be brushed off with WD40 and a brass brush easily. It *DOES NOT* hinder the use of the tool in any way at all.)

LePera Barebones Solo, LN-001 ['96-'03] Dyna - $224 MSRP, sell for $70 (this is for around town/bar-hopping and/or young butts! Sits you nice and low *in* the bike.) <http://lepera.com/v4_Dyna_06_13_detail.php?SEATID=1>

Everything but the ignition tool and the lock bar, you pay shipping. I'll have to buy the boxes at the post office for almost everything. I live on a disability check, so these prices are made so *anyone* can afford them. No haggling. I'll tell you the parts of my anatomy that can be kissed if you try to ask for it lower.

PayPal or cash (I've *paid* through paypal, but never received, so it'll take me once or twice to get it figured out and working, heh). I may be a mean SoB, but you'll not find a more honest person either.

 

Do you have a part number on the cam bearing tool?

 

Unfortunately I don't. I got it off eBay several years ago when I still had my '09 FXD (it was for that bike actually, when I put some S&S cams in it).

 

09 was a 96" right? There are two puller sets, but one is 88 only the other is 96+

 

Correct, '09 was 96". This is for 96" twin cams.

 

Everything but the slip-ons are *SOLD*.