S&S 110 bolt on kit ...
#1
S&S 110 bolt on kit ...
Might be a good time to scoop up one ....soon ..!!!
http://powersportsbusiness.com/top-s...e-kits-in-u-s/
http://powersportsbusiness.com/top-s...e-kits-in-u-s/
Last edited by springers4ever; 12-27-2017 at 02:42 AM.
#2
Seems to be something to do with the material used in the liners infringes on a HD patent. Reports on another forum say S&S already has a replacement in the pipeline.
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
#4
Steel or cast iron ...???
Seems to be something to do with the material used in the liners infringes on a HD patent. Reports on another forum say S&S already has a replacement in the pipeline.
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
#5
Supposedly, the material that S&S will be using exhibits better heat transfer and leakdown properties than the material it replaces. Not that (as I've heard) the old material was lacking in any way.
#6
"Material infringement".........what is next?......we are breathing the air needed to correctly power the "their" bikes?
Comical, but sad also.
Scott
Comical, but sad also.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#7
"Material infringement"....
Serious ??? ...has got to be more to it than that ....uh ???
Last edited by springers4ever; 12-28-2017 at 06:55 AM.