Whats your Winter Build
#21
Fuel Moto 110 kit
S&S Dark Horse Blueprinted Balanced crank
Fuel Moto Level B heads
S&S cam plate and oil pump
Woods TW -777 cams
SE forged rocker plates
Rocker Lockers
Fueling head studs
PV tuner or FP3 (have both)
S&S power tune duals
V&H 4” Monster Rounds
SE Ventilator A/C
Scheduled for first of December
S&S Dark Horse Blueprinted Balanced crank
Fuel Moto Level B heads
S&S cam plate and oil pump
Woods TW -777 cams
SE forged rocker plates
Rocker Lockers
Fueling head studs
PV tuner or FP3 (have both)
S&S power tune duals
V&H 4” Monster Rounds
SE Ventilator A/C
Scheduled for first of December
SE 58mm throttle body
5.3 SE injectors
58mm Ventilator backing plate
The following 4 users liked this post by Naz:
98hotrodfatboy (12-04-2020),
eighteight (11-23-2020),
Low budget Dan (12-04-2020),
Stopit (12-01-2020)
#23
#26
#27
Not much of a build really.. Just bolting on some parts to a 2013 103" Streeet Bob.. Hillside stage II heads, Woods 5-6 cam, Zero deck the cylinders, rings, Port match throttle body, Supertrapp. SE clutch spring and a good tuner.. Not sure on the Air Cleaner yet.. Any recommendations? I Would be very please to see the torque in the >120 range..
#28
The following users liked this post:
98hotrodfatboy (12-04-2020)
#29
#30
winter build edmonton 2018 cvo st glide
this has all ready began
-s and s 128 kit
-mow compensator
-s and s oil pump and cam plate
-gear drive cam
-t man 4059 cam
-610 lift s and s roller rockers
-heads by precision machine
-barnett scorpion clutch and billet basket
-dark horse crank balanced
-hpi 62 mm throttle body
-t man custom breather
-t man oil pan vent line kit
-power vision tuner
-hpi ss 2 into 1 exhaust
motor is built waiting for heads and crank
-s and s 128 kit
-mow compensator
-s and s oil pump and cam plate
-gear drive cam
-t man 4059 cam
-610 lift s and s roller rockers
-heads by precision machine
-barnett scorpion clutch and billet basket
-dark horse crank balanced
-hpi 62 mm throttle body
-t man custom breather
-t man oil pan vent line kit
-power vision tuner
-hpi ss 2 into 1 exhaust
motor is built waiting for heads and crank
Last edited by smoking; 12-04-2020 at 08:50 PM.