No fire on rear cylinder
#11
10-23-2015, 04:23 PM
What do you think would be a good replacement for it?
#12
10-23-2015, 05:55 PM
Join Date: Jan 2011
Location: Haslet Texas
Posts: 20,999
Likes: 0
Received 4,317 Likes
on
1,946 Posts
#13
10-23-2015, 06:14 PM
Seasoned HDF Member
Ultima is the same ignition with a different sticker...for a cheaper price.
The crane coil you removed is probably still good, and a better coil than the accel you replaced it with.
http://www.ebay.com/itm/Ultima-Progr...6o6I3A&vxp=mtr
http://www.ebay.com/itm/Dynatek-D2Ki...ZRnl1E&vxp=mtr
The crane coil you removed is probably still good, and a better coil than the accel you replaced it with.
http://www.ebay.com/itm/Ultima-Progr...6o6I3A&vxp=mtr
http://www.ebay.com/itm/Dynatek-D2Ki...ZRnl1E&vxp=mtr
#14
10-23-2015, 06:42 PM
#15
10-23-2015, 06:49 PM
Ultima is the same ignition with a different sticker...for a cheaper price.
The crane coil you removed is probably still good, and a better coil than the accel you replaced it with.
http://www.ebay.com/itm/Ultima-Progr...6o6I3A&vxp=mtr
http://www.ebay.com/itm/Dynatek-D2Ki...ZRnl1E&vxp=mtr
The crane coil you removed is probably still good, and a better coil than the accel you replaced it with.
http://www.ebay.com/itm/Ultima-Progr...6o6I3A&vxp=mtr
http://www.ebay.com/itm/Dynatek-D2Ki...ZRnl1E&vxp=mtr
Thanks for your help, Tom!
#16
10-24-2015, 08:21 AM
Ultima is the same ignition with a different sticker...for a cheaper price.
The crane coil you removed is probably still good, and a better coil than the accel you replaced it with.
http://www.ebay.com/itm/Ultima-Progr...6o6I3A&vxp=mtr
http://www.ebay.com/itm/Dynatek-D2Ki...ZRnl1E&vxp=mtr
The crane coil you removed is probably still good, and a better coil than the accel you replaced it with.
http://www.ebay.com/itm/Ultima-Progr...6o6I3A&vxp=mtr
http://www.ebay.com/itm/Dynatek-D2Ki...ZRnl1E&vxp=mtr
#17
10-24-2015, 08:22 AM
Thread
Thread Starter
Forum
Replies
Last Post
neverdown
Ignition/Tuner/ECM/Fuel Injection
3
08-08-2012 07:45 PM
13choppers
Ignition/Tuner/ECM/Fuel Injection
0
06-03-2009 02:30 AM