106 BB Upgrade - What Suits??
#11
Have stock cylinders bored to 107. A good shop such as Hillside, or GMR Performance who I use will match the pistons to the bore and set the end gap on the rings. S&S bores their cylinders optimal. This means they are all (about) the same size, and take pistons off the shelf. Save the bucks and do the 107". Whatever cam you like such as the 555, or 54H, street port with stock throttle body. Excellent build. Very reliable.. I have done a few with no problems
#12
Have over 20 sets of clients cylinders in the works here, currently.
"The wheels of industry, roll on."
Scott
"The wheels of industry, roll on."
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#14
Thread
Thread Starter
Forum
Replies
Last Post