Engine case serial number problems
#1
Engine case serial number problems
Just bought an 02 special construction softail. It was originally built by cycle connection in Joplin,MO wich is a Harley dealer. All the owners of the bike claim to have not changed anything and the dealer is claiming the motor is a 80ci revtech engine. First of revtech said they never made a 80ci and the serial isn't one of theirs. I've called all the major motor and case manufacturers with no luck. Maybe someone on here can help me. The numbers on the case are located just below the jugs in the middle of them. Number has the open star at the end and beginning of the number. The number is BKLT******. Thanks.
#2
#3
In regards to the 45"er, here in NYS, you can get those registered, by taking those numbers to the DMV, with a pencil tracing, and if it has not been registered in quite some time, they'll issue you a registation.
That 20" pulley on that engine indicates it may have been used for an irrigation pump, sawmill, or for some other remote power source.
Scott
That 20" pulley on that engine indicates it may have been used for an irrigation pump, sawmill, or for some other remote power source.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
Thread
Thread Starter
Forum
Replies
Last Post