Looking for pics of an installed Khrome werks hitch
#1
#2
Join Date: Jan 2011
Location: Southeast Michigan 15 Minutes East Of Hell
Posts: 147,603
Received 47,791 Likes
on
18,561 Posts
Last edited by Uncle Larry; 08-29-2017 at 07:49 PM.
#4
#5
There are a couple hitch install videos on youtube that might help.
https://www.youtube.com/watch?v=EsRXfV8Utw0
https://www.youtube.com/watch?v=EsRXfV8Utw0
Hitch is finally on, and bike is back together. What a pain in the *** this was. Especially comparing to the vids I watched on YouTube. Had to pull the rear fender(we'll drop it anyway, to remove a washer so the mount would fit. Lots of stuff had to be removed, was very time consuming. Still need to get a ball, not going out to get one tonight. So no test ride tonight.
What a pain in the ***. The bottom bolt went through 4 different pieces, I couldn't get the right side lined up and the bolt through. Spent over an hour and a half on that last step.
All in all, it was a job I don't think I want to repeat. Gonna grab a ball when I'm out tomorrow so I can test it out.
About 4.5 hours in on installing it. Time for a beer, 😂
#6
Join Date: Jan 2011
Location: Southeast Michigan 15 Minutes East Of Hell
Posts: 147,603
Received 47,791 Likes
on
18,561 Posts
#7
Jun in case someone else is looking for info on this hitch, here a a few pics of the install. Had to pull the fender struts, unbolt the fender and drop it so the top mount could be bolted to the fender and then to the frame.
Ended up having to pull the slip ones and the saddlebag crash bars to get the fender struts back on and the bottom bolt through.
Installed 1
Installed 2
Top mount on fender, not bolted to the frame yet.
Bottom mount (inside Bolt)
Ended up having to pull the slip ones and the saddlebag crash bars to get the fender struts back on and the bottom bolt through.
Installed 1
Installed 2
Top mount on fender, not bolted to the frame yet.
Bottom mount (inside Bolt)
Last edited by steelerdude1; 08-30-2017 at 08:01 PM.
Trending Topics
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
rollnthunder
Motorcycles For Sale
9
10-14-2013 01:12 PM
Mississippi Bagger
Hacked, Conversions and Trailering
3
07-15-2013 08:10 PM