Vance & Hines FuelPak 3 Updates!!!!!!!
#1
Vance & Hines FuelPak 3 Updates!!!!!!!
Just wanted to let those who are using the FP3 on their Street Rod they just updated the firmware to include both idle and redline RPM adjustments.
I personally lowered the fully warm idle RPM to 1050 (last 2 cells) and raised the redline to 9500. I should be able to ride today to test this out if it warms enough.
I personally lowered the fully warm idle RPM to 1050 (last 2 cells) and raised the redline to 9500. I should be able to ride today to test this out if it warms enough.
#3
#4
I’m the same. I don’t know anyone locally who has one so I don’t have any comparison. I’ve found that it really comes to life in the 4-5k range. My road king on the other hand preferred around 3500
#5
The idle adjustment feature worked great. 1100RPM seems like the sweet spot. The redline......not so much. No matter what I did the bike would not rev past 6500RPM. Made a few adjustments in the app. I even flashed in an old tune and then reflashed the modded CSR tune I had been running with great results. It's stuck at 6500RPM. The app is showing 9500RPM as the set redline. I have an email into the V&H's CSR rep. We'll sort this out.
Last edited by modular; 12-03-2017 at 02:12 PM.
#7
Trending Topics
#8
#10