Ignition/Tuner/ECM/Fuel Injection Need advice on ignition issues? Questions about a tuner? Have questions about a EFI calibration or Fuel Injection? Tips on Engine Diagnostics, how to get codes, and what they mean. Find your answers here.

'06 EFI/ECM service bulletin

Thread Tools
 
Search this Thread
 
  #41  
Old 08-02-2011 | 09:35 AM
KBFXDLI's Avatar
KBFXDLI
Big Kahuna HDF Member
Joined: Feb 2006
Posts: 23,881
Likes: 32
From: USA
Default

Look for the 8 degree fuel injectors under your gas tank on the left side with a flashlight. You should be able to read the part number on the side. I had the issue and got the 25s installed at 1000 miles. Huge difference. My bike was hard starting and surged a lot while riding and cold sputtered. Once the new injectors were in...no issues.

If you want the .pdf file then PM me your email address.
 

Last edited by KBFXDLI; 08-02-2011 at 09:39 AM.
  #42  
Old 08-02-2011 | 10:27 AM
OddJob's Avatar
OddJob
Advanced
Joined: Feb 2010
Posts: 94
Likes: 7
From: Missoula, MT
Default

Thank you for the info. I verified I have the part number for the 8* injectors. I will bring it up with the dealer and see what they have to say about it.
 
  #43  
Old 09-15-2011 | 09:47 AM
Edward6967's Avatar
Edward6967
Stage I
Joined: Sep 2011
Posts: 1
Likes: 0
From: Huntsville, AL
Default

Xkvator,
Hi my name is Ed and I was reading through some of the old threads. I'm having some rear injector issues, or so the diag code says. Anyway, I saw you had posted a link someitme back that was to your site. It was a PDF for a service bulletin. I was curious if you still had the bulletin, and if so, if you'd email it to me. I tried snagging it from your posted link, alas it's dead. My email is:

edward6967@yahoo.com
Respects,
Ed
"Edward6967"
 
  #44  
Old 10-05-2011 | 01:00 PM
Maple Leaf Hog's Avatar
Maple Leaf Hog
Advanced
Joined: Dec 2006
Posts: 82
Likes: 0
From: Caledonia, Ontario Canada
Default

Just wondering I had this injector change done in 2007. They do a map change. My question is if this map change is a stock map or the map with a stage 1 kit. At the time I had Vance and Hines ovals but no other mods. I know this is old but have just installed PCM III with S/E air filter.
 
  #45  
Old 10-06-2011 | 09:41 AM
Race freak's Avatar
Race freak
Intermediate
Joined: Jun 2011
Posts: 49
Likes: 0
From: Chandler,AZ
Default

You guys might want to check out Marrin Fuel Injection. They rebuild,and modify, match and flow injectors to within 1%. I had sent a pair to them out of my 03 Ultra to have them checked out and they were 6% off, they got them down to 3%. thats as close as they could get with my used ones. the service was only $70. After talking with them they basicly take stock HD (Yes HD) injectors and rework them. They have 3 different stages to choose from. My bike ran smoother from servicing the injectors. I could have bought a new set for $85 each, but i wanted to know where mine were at. Hell HD new are like $70. Check out there web page under Harley Injetors.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tmac00333
Softail Models
3
11-05-2012 07:43 PM
outlaw0013
Touring Models
11
10-21-2007 08:17 PM
CHEESE
Dyna Glide Models
16
09-01-2007 04:56 AM
firecapt11
Touring Models
8
05-22-2007 01:04 PM
Wide06
Exhaust System Topics
3
11-03-2006 12:55 PM



Quick Reply: '06 EFI/ECM service bulletin



All times are GMT -5. The time now is 06:39 PM.