Ignition/Tuner/ECM/Fuel Injection Need advice on ignition issues? Questions about a tuner? Have questions about a EFI calibration or Fuel Injection? Tips on Engine Diagnostics, how to get codes, and what they mean. Find your answers here.

SERT - need one

  #1  
Old 02-22-2006 | 09:37 PM
2005UltraNC's Avatar
2005UltraNC
Thread Starter
|
Road Master
Joined: Jan 2006
Posts: 1,200
Likes: 1
From:
Default SERT - need one

Anyone know who has a SERT (32107-01E)? - my supplier says Harley has them backordered until 4/30/06

 
  #2  
Old 02-22-2006 | 10:10 PM
zubaugh's Avatar
zubaugh
Road Captain
Joined: Jul 2005
Posts: 705
Likes: 8
From: Titusville, FL
Default RE: SERT - need one

Contact Pop (Mark) at
M&M Cycles
4416 Tiffin Ave.
Sandusky Oh 44870
419-624-8739
Fax 419-624-1170
http://www.mandmcycles.com
mbk30072@aol.com

I bought one from him this morning and have the Fed-Ex tracking # already.

Seems Harley is really goofed up right now, something happed at their warehouse early in the month, i'm told they had a snafu during a warehouse move. At any rate the word on the street is mid April. However, the backorders apparently are being filled a few at a time. M&M said they were told mid april a week ago Tuesday and receievd 10 the next day. They sold the last 2 Sunday. Yesterday they received 3 and I got one this morning. The other 2 went gone by 8AM.

I had inquiries in to East Coast, Zanotti and Chicago Harley. East Coast responded:
SORRY I DO NOT HAVE THAT

THANKS, JONATHAN

EASTERN PERFORMANCE CYCLES

Zanotti and Chicago have yet to respond.

M&M was back to me in minutes and I placed my order and yes it is the 32107-01E. $367.96 + 16.95 shipping.

These are a hot commodity and will go fast so I'd recommend you try to stay in contact with Zanotti Motors and M&M as they are the only two that are talking about the "E".

Best I can tell you

GOOD LUCK

Bob
 
  #3  
Old 02-26-2006 | 08:22 PM
2005UltraNC's Avatar
2005UltraNC
Thread Starter
|
Road Master
Joined: Jan 2006
Posts: 1,200
Likes: 1
From:
Default RE: SERT - need one

If it wasn't for bad luck, I wouldn't have any luck at all.

Lost bid (with one minute to go) on ebay, then M&M sold one (that I could have had if my darm cell phone was working - i.e. they sold it to someone else because I did not get back to them fast enough).

Oh well, still lokking.
 
  #4  
Old 02-26-2006 | 09:19 PM
zubaugh's Avatar
zubaugh
Road Captain
Joined: Jul 2005
Posts: 705
Likes: 8
From: Titusville, FL
Default RE: SERT - need one

M&M seems to be in the pipe. Maybe they'd let you order one and then you'd be next in line. They're a couple of dollars more but it may be better than trying to catch the new release that everyone seems to want. Mine will arrive Tuesday via Fed Ex surface.

I'd guess Zanotti should be getting some but who knows how mant they already have on Back Order. The long and the short of it is that Harley is shipping but no one seems to know who's next.

Good Luck!!
 
  #5  
Old 02-27-2006 | 10:13 AM
harleybob's Avatar
harleybob
Cruiser
Joined: Nov 2005
Posts: 246
Likes: 0
From: Roselle, IL
Default RE: SERT - need one

What is the difference between these two serts. The first model was 32107-01D. I see the new model # is 32107-01E. Thanks. Bob.
 
  #6  
Old 02-27-2006 | 10:15 AM
Terry TK's Avatar
Terry TK
Big Kahuna HDF Member
Joined: Feb 2005
Posts: 20,310
Likes: 157
From: San Antonio Texas
Default RE: SERT - need one


ORIGINAL: harleybob

What is the difference between these two serts. The first model was 32107-01D. I see the new model # is 32107-01E. Thanks. Bob.

Just a software upgrade. Probably has something to do with the 06's.
 
  #7  
Old 02-27-2006 | 01:04 PM
wideglide06's Avatar
wideglide06
Intermediate
Joined: Jan 2006
Posts: 41
Likes: 0
Default RE: SERT - need one

Does anyone know if you can use the SERT 32107-01E Tuning Software (CD Rom P/N 32117-01F) with the hardware from a later version, for example the 32107-01D SERT?

Thanks
 
  #8  
Old 02-27-2006 | 04:01 PM
JamieWG's Avatar
JamieWG
Road Master
Joined: Oct 2005
Posts: 1,034
Likes: 3
From:
Default RE: SERT - need one

I called all over the country and no one has the SERT 32107-01E in stock. They are back ordered until April. I found one place that had the 32107-01D in stock and they assured me it would work fine. I went ahead and ordered it.

Are you guys sure the difference between the 32107-01D and the 32107-01E is only software? The dealer said he hasn't even seen the E version yet and he's been using the D version on all of his '06 models. All I really want to do is richen up my mixture a little bit. Think I did the right thing?
 
  #9  
Old 02-27-2006 | 08:22 PM
WVULTRA's Avatar
WVULTRA
Road Captain
Joined: Feb 2006
Posts: 739
Likes: 3
Default RE: SERT - need one


ORIGINAL: wideglide06

Does anyone know if you can use the SERT 32107-01E Tuning Software (CD Rom P/N 32117-01F) with the hardware from a later version, for example the 32107-01D SERT?

Thanks
wide: Yes! I'm currently using a 32107-01C SERT with Software CD 32117-01F. No problems!

[sm=icon_cheers.gif]
 
  #10  
Old 02-27-2006 | 08:37 PM
2005UltraNC's Avatar
2005UltraNC
Thread Starter
|
Road Master
Joined: Jan 2006
Posts: 1,200
Likes: 1
From:
Default RE: SERT - need one

Actually the latest CD part number is 32117-01G $14.50 from Zanotti's

I'm not a SERT expert, but would think that the newer versions of the SERT -01E for example are just software changes. i.e. the interface box really is just that - a device that interfaces your PC to the ECM - and HD through in a little "safeguard" - where the interface box is coded to the VIN number of the bike (sort of like a hardware license).


So, yes, if I can find an older version of the SERT, I'd go for it and then purchase the current CD version. Seems the guy above probably snagged the last SERT available on the planet! Again, just my bad luck.

 

Thread Tools
Search this Thread
Quick Reply: SERT - need one



All times are GMT -5. The time now is 05:50 PM.