How do you retreive 2006 Dyna trouble codes
#1
03-06-2006, 01:37 AM
#2
03-07-2006, 11:41 AM
Road Captain
#3
03-07-2006, 01:50 PM
#4
03-07-2006, 03:08 PM
Road Captain
#5
03-09-2006, 12:45 AM
RE: How do you retreive 2006 Dyna trouble codes
PowerCobra98,
Thank You, I started checking everything on my bike and found loose battery connections and a broken connector under the seat, I corrected those three items and took the bike out for a ride and the engine light didn't come back on. I used the procedure that you posted and found a code in memory P0154 and did a search for that code on this site which turned out to be rear o2 sensor open not responding (the broken connector) Thanks again for the help.
Thank You, I started checking everything on my bike and found loose battery connections and a broken connector under the seat, I corrected those three items and took the bike out for a ride and the engine light didn't come back on. I used the procedure that you posted and found a code in memory P0154 and did a search for that code on this site which turned out to be rear o2 sensor open not responding (the broken connector) Thanks again for the help.
#6
03-09-2006, 01:39 AM
Outstanding HDF Member
Join Date: May 2005
Location: Glendale, AZ.
Posts: 3,116
Likes: 0
Received 0 Likes
on
0 Posts
RE: How do you retreive 2006 Dyna trouble codes
ORIGINAL: WS6 Formula
PowerCobra98,
Thank You, I started checking everything on my bike and found loose battery connections and a broken connector under the seat, I corrected those three items and took the bike out for a ride and the engine light didn't come back on. I used the procedure that you posted and found a code in memory P0154 and did a search for that code on this site which turned out to be rear o2 sensor open not responding (the broken connector) Thanks again for the help.
PowerCobra98,
Thank You, I started checking everything on my bike and found loose battery connections and a broken connector under the seat, I corrected those three items and took the bike out for a ride and the engine light didn't come back on. I used the procedure that you posted and found a code in memory P0154 and did a search for that code on this site which turned out to be rear o2 sensor open not responding (the broken connector) Thanks again for the help.
#7
03-10-2006, 10:38 PM
Trending Topics
#8
03-11-2006, 01:46 AM
Road Captain
#9
03-11-2006, 02:17 AM
RE: How do you retreive 2006 Dyna trouble codes
thank you and ive cleared that code how about a p0151 i put a tfi on my bike today so i go for i ride around the block and then the light comes on and shoots out the code but the p0131 only popped up once.also i have some popping on deceleration.
#10
03-11-2006, 02:26 AM
Road Captain