110" Evo / Twincam FATVO engine - READ
#1
110" Evo / Twincam FATVO engine - READ
SPUTHE "Fatvo" 110" Evolution / Twincam Harley engine
Screamin Eagle 110" heads with ACRs!
Evolution bottom end with TwinCam top end. The simple single cam (no chains or hydraulic tensioners) bulletproof bottom end of an Evolution engine with the much better flowing Twincam heads with factory automatic compression releases.
110" / 1797cc
-Sputhe FATVO crankcase
-Sputhe FATVO pushrods
(Required so head pushrod holes don't need to be machined)
-Sputhe oil pump cover
(Sputhe cases do not have provision for oil pressure sender so they make a special oil pump cover for this reason)
-S&S Evo 4 5/8" crank and rods
-S&S Evo Oil pump
-HD 3 7/8" black cylinders with fresh 0 mile 010 bore
-HD Screamin Eagle 110" 2.08 intake valve 95cc ACR heads with triple springs.
-HD Chrome rocker boxes and stock rockers.
-new WISECO 3 7/8" 010 over 3cc dome forged pistons with coated skirts modified for this application.
-new S&S Evo 600 cam
-new Cometic gaskets
-new Cometic 030 head gasket
-new Inner cam bearing and washer
-new Chrome lifter blocks
-new Hylift-Johnson slow leak lifters
Engine was tore down and checked. Lots of new parts. Fresh 010 over bore. Compression would be 10:1 static. New means new. All other parts are used but good.
Would really prefer to keep this for myself because it is rare item but now it's just sitting in garage as things have changed here. Contact for details.
If this add doesn't say SOLD then YES it's still available.
$4000 FIRM I need to move for new project.
Will ship worldwide on your dollar. Will include S&S engine stand.
LOCATED IN EDMONTON, AB, CANADA
Screamin Eagle 110" heads with ACRs!
Evolution bottom end with TwinCam top end. The simple single cam (no chains or hydraulic tensioners) bulletproof bottom end of an Evolution engine with the much better flowing Twincam heads with factory automatic compression releases.
110" / 1797cc
-Sputhe FATVO crankcase
-Sputhe FATVO pushrods
(Required so head pushrod holes don't need to be machined)
-Sputhe oil pump cover
(Sputhe cases do not have provision for oil pressure sender so they make a special oil pump cover for this reason)
-S&S Evo 4 5/8" crank and rods
-S&S Evo Oil pump
-HD 3 7/8" black cylinders with fresh 0 mile 010 bore
-HD Screamin Eagle 110" 2.08 intake valve 95cc ACR heads with triple springs.
-HD Chrome rocker boxes and stock rockers.
-new WISECO 3 7/8" 010 over 3cc dome forged pistons with coated skirts modified for this application.
-new S&S Evo 600 cam
-new Cometic gaskets
-new Cometic 030 head gasket
-new Inner cam bearing and washer
-new Chrome lifter blocks
-new Hylift-Johnson slow leak lifters
Engine was tore down and checked. Lots of new parts. Fresh 010 over bore. Compression would be 10:1 static. New means new. All other parts are used but good.
Would really prefer to keep this for myself because it is rare item but now it's just sitting in garage as things have changed here. Contact for details.
If this add doesn't say SOLD then YES it's still available.
$4000 FIRM I need to move for new project.
Will ship worldwide on your dollar. Will include S&S engine stand.
LOCATED IN EDMONTON, AB, CANADA
Thread
Thread Starter
Forum
Replies
Last Post
wadingdog
Exhaust System Topics
3
08-23-2012 09:33 AM