One of only a few remaining "original" S&S produced 116" Twin Cam “A” engine cases. This motor was assembled by the renowned Phil Mell of Mells Speed & Custom Cycles and produces incredible HP and torque numbers. S&S Intelligent Ignition which is actually an on board programmable computer, S&S .gear driven 625 lift cams, Feuling oil pump, 45 mm Mikuni carburetor, Super Wimmer Velocity stack with billet breather system. There has been extensive port work in heads with a matched S&S Intake manifold. Manual S&S compression releases. Complete with Charging system. Complete ignition is included. Original MSO is available.

I am parting out my Pro-Street bike. I am located in Reading, PA. All sales to lower 48 states only unless your coming to pick the stuff up personally. Paypal is OK but I would prefer Certified Bank checks or cash. If you have a history with me a personal check is cool. I want to pull this bike apart the second weekend in Oct and ship all components by the end of Oct. So if you want to personally hear the motor running it will have to be before 10/11/08. I intend to video tape the motor running prior to pull out. If you want something I will accept a 25% deposit to hold it till its ready to ship.

Less than 6,000 miles on bottom end, and 600 on top end

$5,500 + shipping but I'm willing to listen to offers. Please see my other classified posts for the balance of components from this bike

danowert@verizon.net

 

wrong post

 

To The Top

 

I need to see emails since I am getting bombed with info requests and people stating that they want something. Respond to me in email form with your correct (NOT Screen Names) names. Please reference your screen names in the email because I'm logging everything so that I know who asked for what first. Also what forum you saw the ad on

Thanks, Dano

 

Top of the list

 

Parts will be going on eBay 10/12/08

 

Sold on eBay

 

Glad to hear you finally got it sold! I wanted bad for my dresser, but like you said, it would take a lot to detune it to be a cruiser. My search is still on!


Benji

 

I'm looking to sell a 116" Diamond Cut Twin Cam engine. Motor has about 1000 miles on it and came out of a 99 RoadKing. Roadking did wheel stands with just a twist. Motor runs cool @205 F. Here are a few specs:

R&R raised port heads w/compression release - diamond cut
S&S Flywheels
S&S jugs - diamon cut
S&S Forge pistions - compression 11:1 - I got 135 miles per 5 gallon tank
S&S gear drive .640 lift cams
Fueling oil pump
Roller rockers
S&S tappets
HP 129 and Torque 131
Asking $6800