Auto start with clutch lever
#1
#5
The following 2 users liked this post by Max Headflow:
MotoJockey (02-28-2023),
porkster (03-08-2023)
#6
The following 2 users liked this post by Cobra1:
MotoJockey (02-28-2023),
weee123 (02-28-2023)
#7
Unplug the starter relay, read the voltage at the Black/Red wire in the connector (where pin 85 goes), it should be zero when not pressing the start button, and it should read system voltage when button is pressed.
If it reads voltage all the time, the start switch is stuck closed.
If it reads voltage all the time, the start switch is stuck closed.
Last edited by Dan89FLSTC; 02-28-2023 at 09:11 AM.
The following 2 users liked this post by Dan89FLSTC:
Fritz Franz (03-06-2023),
hardheaded (03-06-2023)
Thread
Thread Starter
Forum
Replies
Last Post