Fullsac stage 1 got 97hp 102 torque.

 

Not happening. To the OP, as everyone else has said, you need cams or headwork to reach 100/100 as well as higher compression. A good set of Woods 6-6's. 555's or 777's will get you there as well as several Andrews cams, or possibly even the SE 203 or 204's, but not positive how well those will work in a CVO engine to tell you the truth. Also, the numbers you're getting for a stock engine with just stage 1, are about right.

 

09 Ultra Classic CVO added Vance & Hines Power Duals & 4 1/2 pipes, SEPST.

Before
86.56 HP
104.68 Torque

After
94.14 HP
113 Torque

Seem right?

 

Yup, that sounds about right. On the high side, but definitely possible.

 

Stock my VRSCSE is 126HP at crank and 115HP at rear wheel.