Can someone shoot me a link for the bracket so the license plate will layback. I have looked and all i can find are full kits and there has to be someone out there that just makes the bracket so it lays down. Even if someone will make me one let me know. They have to be out there cuz i seen a few at bike week but never found the onwers
The other problem with just having a bracket to lay it down is you will still have to get inside the fender to remove the bracket under the tombstone light that holds the plate straight up. If you were going to go through that trouble, you may as well get the whole lay down kit.
Just layed back instead of straight up. The bracket looks like it just has a 90 degree angle to it. From what i can tell you just unbolt the lic plate, bolt in the the new bracket and reattach the lic plate to it.
It dont seem like that much trouble at all. Here is a pic (its dark outside). You can see the 2 bolts the hold the plate, the bracket just attaches to that
The lay down kits come with the bracket that needs to be replaced for the lay down plate to be secure. If you didn't want to get a new bracket that mounts under the light, I would at least remove the old one.
It dont seem like that much trouble at all. Here is a pic (its dark outside). You can see the 2 bolts the hold the plate, the bracket just attaches to that
You have the stock bracket. Which is what I just changed out on mine. You will need to remove the bracket that is securing the top of the plate, and it is secured under the light.