What R P M S ? ? ?
DUHH?? TACH? Man I just hit it!! But maybe 80 M.P.H.? Are you giving a test after wards? Because I'M really not sure and I have a lowly 5 speed 06 scremin eagle 103 Fat Boy and you 07 guys have that extra gear!! Man I was JEAPED!!!
[IMG]local://upfiles/24725/F301FEF0EDF0431AAA5E524753D66162.jpg[/IMG]
[IMG]local://upfiles/24725/F301FEF0EDF0431AAA5E524753D66162.jpg[/IMG]
ORIGINAL: 07flstc
Ok guys with tachs , On a 2007 at what speeds in each gear are you at doing 3000 to 3500 rpms ?? Thanks !!
Ok guys with tachs , On a 2007 at what speeds in each gear are you at doing 3000 to 3500 rpms ?? Thanks !!
In the owner's manual it says.....
1st to 2nd 15mph
2nd to 3rd 25mph
3rd to 4th 35mph
4th to 5th 45mph
5th to 6th 55mph
That said, when I got the Rush slip ons all those went out the window. Now it's all different.
THANKS DRRANDALL1 for the comps.! And sorry for being smart *** on the guy but I hardly look at my tach. , To many people on the highway here in the big "D" and must keep eyes on them or your road kill, and I can tell by my motor when to shift, but you have a nice FAT BOY also!! So good luck!! PURPLE HAZE. DAMN Tipn8er thats a bad *** BIKE!!!!!
[IMG]local://upfiles/24725/79D8E3B273B741D99EC4EC45BCA3F4FA.jpg[/IMG]
[IMG]local://upfiles/24725/79D8E3B273B741D99EC4EC45BCA3F4FA.jpg[/IMG]
Trending Topics
ORIGINAL: Demkay
In the owner's manual it says.....
1st to 2nd 15mph
2nd to 3rd 25mph
3rd to 4th 35mph
4th to 5th 45mph
5th to 6th 55mph
That said, when I got the Rush slip ons all those went out the window. Now it's all different.
ORIGINAL: 07flstc
Ok guys with tachs , On a 2007 at what speeds in each gear are you at doing 3000 to 3500 rpms ?? Thanks !!
Ok guys with tachs , On a 2007 at what speeds in each gear are you at doing 3000 to 3500 rpms ?? Thanks !!
In the owner's manual it says.....
1st to 2nd 15mph
2nd to 3rd 25mph
3rd to 4th 35mph
4th to 5th 45mph
5th to 6th 55mph
That said, when I got the Rush slip ons all those went out the window. Now it's all different.
Take this as an estimate as I've changed over the standard 66 tooth pulley on my Deuce for a chromed 70 tooth one so it revs a bit higher, plus I've got the VH Big Radius and SERT, but changing at about 3,000 to 3,500rpms (have the combo tach installed too):-
1st - up to about 20kph (12.4mph)
2nd - up to about 55kph (34.1mph)
3rd - up to about 80kph (49.7mph)
4th - when doing 100pph (62.1mph)
5th - rarely used yet... only done 403 miles
6th - used but only when doingplus 65mph and rpm drops to about 2,200 to 2,500... it charges along brilliantly though and eats up the road. Chalk and cheese compared to my now departed '01 Fireblade.
1st - up to about 20kph (12.4mph)
2nd - up to about 55kph (34.1mph)
3rd - up to about 80kph (49.7mph)
4th - when doing 100pph (62.1mph)
5th - rarely used yet... only done 403 miles
6th - used but only when doingplus 65mph and rpm drops to about 2,200 to 2,500... it charges along brilliantly though and eats up the road. Chalk and cheese compared to my now departed '01 Fireblade.



