Hi there,

I have a 2014 FXSB Breakout that I bought from a private party. Can anyone recommend a good relocation kit for the license plate - a link to the product page would be ideal. I want to move it from the side to the back - to be mounted flush where the fender ends.

I have searched high and low without much luck.

--jf

 

Bumping this thread up. Any pointers much appreciated.

 

This is the one I used on mine. Simple install and inexpensive. Also if you get the custom dynamics fender signals, it fits right underneath.

 

 

Thanks @matte . Do you remember where you bought it from? If you have a link to a product page, that would be very helpful.

BTW something like this is exactly what I was looking for.

 

Totally forgot to link it.

https://japan.webike.net/products/21760725.html

 

Thank you @matte !

 

Hi @matte and others. I wanted to come back and share what I ended up doing for relocating lic plate/turn signals.

After looking at the Japanese and Australian solutions, I felt they were either too expensive ($500+ for the aussie kit) or not complete kit (the japanese kit did not have a way to relocate the turn signals). I needed both so that I could mount saddle bags.

I then found greatbikegear.com. Its an American company selling high quality accessories for motorcycles. The lic plate/turn signal relocation kit that they advertise on their site said that it works for only 2018 model and up. Looking at the kit and the pics and comparing the fender pics of pre-2018 and 2018 breakout models, it appeared that the kit should work on earlier models as well, not just 2018+. Here is a link to the 2018+ kit: https://www.greatbikegear.com/store/...reakout.html#/

I spoke to Bob (the owner/CEO) of the company and he was very helpful and expressed a desire to work on this together and adapt the kit for pre-2018 models.

Long story short, after some very small tweaks, I was able to successfully relocate both my turn signals as well as lic plate and it looks great! Please see the pics.

Bob is incorporating the small tweaks and is going to put out another kit next week that would work out of the box for all pre-2018 models.

I couldn't have been happier with the outcome as well as the customer service that Bob provided.