i have a 2012 blackline. im putting new bars on and am looking to move my blinkers to my forks. wondering whats the best way you guys have found to do this? was looking at the kuryakyn fork clamps. but not sure if i need new blinkers then to. also what have you guys come up with for moving the rear blinkers. thanks

 

the hd rings work with the stock blackline blinkers..think the Kuryakyn do as well

 

i did it and it was pretty easy.. your gonna need to solder and jump out the blinker wires from the controls down to the forks, shrink wrap the solder joints. i used the HD turn signal relocation kit with the original stock signals.

 

do you have a part number. the dealership id be getting them from are retarded when it comes to the blackline. they show two different ones and every question i ask i get an idk answer. i want the nice and tight to the forks

 

Theres only one turn signal relocation kit for the blackline ill get u the part no. when im at the manual but its very simple its just a fork clamp with a bolt for the signal housing. It only comes in chrome but it fits well because the part of the fork it goes on is polished aluminum

 

ive been looking at the kuryakyn fork clamp and the p clamp. not sure which would work better. i want them nice and close to the forks.

 

Here is the only ones that HD has available for the Blackline...picked mine up today..part number 68952-98 http://www.harley-davidson.com/gma/g...bmLocale=en_US

 

looks like the kuryakyn fork clamps the same just a little smaller in design

 

Can the turn signals be mounted to the clamps without using the standoffs?
Thanks

 

just got my BL on tuesday, trying to become active so i can see the pics.