Originally Posted by Chaparro78 (Post 11498538)

I have spoke to him, waiting on a quote for 1 1/2 inch risers. I think it would look good in black since the bars are black as well.

Originally Posted by crawlgsx (Post 11498765)

But it goes between the risers and the forks, both of which are chrome. I would think that would look off, but I guess pics will tell! :)

1.5" might do the trick!

Originally Posted by crawlgsx (Post 11499643)

I wonder if 1.5"-2" will work without extending the cables?

Originally Posted by Chaparro78 (Post 11501580)

Emailed Jim today and they should be in the mail tomorrow. $60 for 1.5" risers. Hoping no new cables will be needed. From looking at it earlier, if a cable needs to be replaced it will be the front break line. I know with the 1" riser added by another forum member to their breakout did not require new cables.

Originally Posted by crawlgsx (Post 11496683)

Trying to find some riser extensions that might work with the Breakout.

Changing risers wouldn't really work due to the way the speedo mounts, I think?

If I could find some 1.5-2inch riser extensions I think that would be enough to stop me from having to hunch a bit.

I am having trouble finding any that I can tell if they will work. let alone look ok.

I am just trying to avoid having to change bars and extending wires.

Thoughts?

I'm wondering if some of the riser extensions for like the Street Bob would go at the top between the current risers and the bars (and still allow the speedo mount to attach) (Something like https://www.denniskirk.com/2-in-hand...prd/598067.sku)

or if it would be better to find some risers that go between the tree's and risers?

http://i40.tinypic.com/2ikuxrd.jpg

Originally Posted by Overcast (Post 11504401)

I do not have a breakout (YET!!) and it's been a while since I looked at one in person so........can you not use the bottom portion of a set of higher risers with the top part of your current set that would allow the speed mount on the top? :confused: