1" spacers added
1 Attachment(s)
Added the 1" spacers today. 11/2" will fit without a problem.
|
1 Attachment(s)
My 1.5" spacers arrived today. Bike getting serviced so could not install. Will mock up and take more pics once they are on, then sending them out to get powder coated sunglo red
|
Originally Posted by fldime
(Post 11514558)
Added the 1" spacers today. 11/2" will fit without a problem.
did the spacers add enough height to keep the throttle cables off the tank? |
Parttime379, they still lay on the tank, maybe not as hard against the tank.
|
Originally Posted by Chaparro78
(Post 11515136)
My 1.5" spacers arrived today. Bike getting serviced so could not install. Will mock up and take more pics once they are on, then sending them out to get powder coated sunglo red
|
Spacers
Originally Posted by fldime
(Post 11514558)
Added the 1" spacers today. 11/2" will fit without a problem.
|
1.5" Spacers Installed
5 Attachment(s)
Here are some pics of the 1.5" spacers I installed that SpacerJim made.
I am 5'7" / 165lbs and the 1.5 inches that it brought the bar closer to me made a big difference. Definitely cannot go bigger without new cables. The break line loses its slack when turned all the way left but not tight. I ride more upright and because I am a little back more it's easier to plant my feet on the ground. |
Originally Posted by Chaparro78
(Post 11539655)
Here are some pics of the 1.5" spacers I installed that SpacerJim made.
I am 5'7" / 165lbs and the 1.5 inches that it brought the bar closer to me made a big difference. Definitely cannot go bigger without new cables. The break line loses its slack when turned all the way left but not tight. I ride more upright and because I am a little back more it's easier to plant my feet on the ground. That looks great! I will definitely be getting a set, thanks for being the guinea pig :-D. I ordered some and sent them to Nuchrome in MA who apparently "lost" them. *sigh*. Will have to order another set and try to find someone more reliable to chrome them. :icon_doh: |
Same Question
Originally Posted by parttime379
(Post 11515201)
did the spacers add enough height to keep the throttle cables off the tank?
I was wondering the same if the 1" spacer keeps the cables off the tank also is anyone using Polyurethane Handlebar Riser Bushings when the do this mod? |
So I like what I see with the 1 1/2 Alum spacers from "Spacer Jim".
I followed the link in the thread to spacerjim.com and I don't see any thing about motorcycles. Does anyone know if he is still in business... updated contact info? Thanks |
All times are GMT -5. The time now is 08:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands