Last edit by: IB Advertising
Everything Breakout! Find out everything you need to know! Some topics include:
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
The Everything Breakout Thread
#3331
#3332
Looks like a Figure Machine.
http://www.figuremachine.com/product...w-vision-5.php
The see through part is a cover. The filter is sealed behind it so air goes through the filter.
http://www.figuremachine.com/product...w-vision-5.php
The see through part is a cover. The filter is sealed behind it so air goes through the filter.
#3334
#3335
#3336
#3337
Softailloweringkit.com... Uses same shocks, and you only remove the front nuts and sleeves, and replace them with collars between the canister and the frame. Then you use the supplied bushing that has a nut built into it. Easy! Didn't change the ride at all!
#3338
did you put risers on under your bar clamps?..and if so where or who makes them?...thanks good looking skoot!
#3339
HELP!
So of course after my first ride, I installed the blackline dash and softtail lowering kit.
This morning go to start it and nothing!
Bike has the fobs not actual keys. And when ya turn the **** to run the lights will come on as normal but nothing on the run switch and bike has no speedo lights or anything.
Any thoughts. I'll be taking the dash back apart to double check it all but I've worked on much harder things and the dash was cake.
Thanks in advanced.
So of course after my first ride, I installed the blackline dash and softtail lowering kit.
This morning go to start it and nothing!
Bike has the fobs not actual keys. And when ya turn the **** to run the lights will come on as normal but nothing on the run switch and bike has no speedo lights or anything.
Any thoughts. I'll be taking the dash back apart to double check it all but I've worked on much harder things and the dash was cake.
Thanks in advanced.