They're calling me a liar, . . .
because I said I was done after getting the D&D exhaust. Bought her 2 months ago and had the original cam chain tensioner replaced. But, while you're in there, might as well do the cams and add fuel management. And of course, ya gotta help get rid of the gases. I was deeply concerned about the 25% drop in gas mileage after having the work done. I realized that if I quit twisting the throttle and making the bike jump, the mileage goes up! I'm enjoying the ride.
because I said I was done after getting the D&D exhaust. Bought her 2 months ago and had the original cam chain tensioner replaced. But, while you're in there, might as well do the cams and add fuel management. And of course, ya gotta help get rid of the gases. I was deeply concerned about the 25% drop in gas mileage after having the work done. I realized that if I quit twisting the throttle and making the bike jump, the mileage goes up! I'm enjoying the ride.


Trending Topics
DONE?..... DONE? What is this DONE you speak of? I know of NO Harley owner that is DONE! Any attempt to resist is just futile so give into it and enjoy making it your own! It's far less painful this way. Figure out what you really want, performance or cosmetics, and spend your money wisely. I have always been performance over cosmetics first. There is not allot you can't find out here on this forum so be patient, save and spend wisely.
Your never done!!!
For me when I am it's usually only because there's a new bike to building or start speeding money and working on. It never ends!!! But I'm ok with that. I think my FB lo will be sticking around for a long long time, unlike the metrics, but I'm not sure I will ever be 100% done with it
For me when I am it's usually only because there's a new bike to building or start speeding money and working on. It never ends!!! But I'm ok with that. I think my FB lo will be sticking around for a long long time, unlike the metrics, but I'm not sure I will ever be 100% done with it
Last edited by ADRENALINE RUSH; Jun 1, 2014 at 04:10 PM.
Thread
Thread Starter
Forum
Replies
Last Post












