113ci motor want to swap cams to Andrews 32g
#1
113ci motor want to swap cams to Andrews 32g
113ci 10.6 comp. stock heads with port polish 1.90in valves, I'm running the Andrews 67g cams now, comes on hard at 3000rpm to 6500rom, but this is a bagger and I'm realizing I want the power to start at 2000rpm any thoughts on going to a 32g cam? I need a gear drive cam because that's what I'm running at this time. No more than 580" lift, running stock rockers.
Thread
Thread Starter
Forum
Replies
Last Post