passenger boards heat issue
#1
#2
Footboard spacers to move the boards out, stage 1 and a tune to cool it down, switch pipes to something like the 09 and laters use where the pipe has a crossover going under the bike are a few solutions that can be done by themselves or all together.
#3
#5
A much easier solution is to get the S&S Power Tune Duals/Khrome Werks head pipe (same pipe). It gives you the new style, under frame exhaust in a bolt on kit. This is the route I'm going to take when I finally get around to doing mine.
#6
To use a factory head pipe you'd need to change the oil pan and I believe you also need to drill and tap a hole for the hanger. There's a good thread on here somewhere describing the process.
A much easier solution is to get the S&S Power Tune Duals/Khrome Werks head pipe (same pipe). It gives you the new style, under frame exhaust in a bolt on kit. This is the route I'm going to take when I finally get around to doing mine.
A much easier solution is to get the S&S Power Tune Duals/Khrome Werks head pipe (same pipe). It gives you the new style, under frame exhaust in a bolt on kit. This is the route I'm going to take when I finally get around to doing mine.
Thread
Thread Starter
Forum
Replies
Last Post