Lowering Front End...lowers seat height by ?
#1
Lowering Front End...lowers seat height by ?
Can anyone that has lowered their front end with any of kits out tell me what it did to yourseat height ?
I am looking to do this only if means a drop at the seat height worth the effort....for exampls a 1.5" lowering kit drops the seat ?....Thanks
Luis
[IMG]local://upfiles/28174/123ADB163C414095918DBA0DA4551CDB.jpg[/IMG]
I am looking to do this only if means a drop at the seat height worth the effort....for exampls a 1.5" lowering kit drops the seat ?....Thanks
Luis
[IMG]local://upfiles/28174/123ADB163C414095918DBA0DA4551CDB.jpg[/IMG]
#2
RE: Lowering Front End...lowers seat height by ?
I lowered my 07 LHRCI 1" in the rear and 1" in the front. I used the Harley shorty air shocks rear, and the cartridge set-up in the front. Not really that much difference in seat height. 1" +-. What worked best for me was the Harley reach seat. It dropped me about 1.5". Combined they put my butt2.5"+- lower to the ground. Finally I can "flat foot it".
Ron
07 Road King Classic
Ron
07 Road King Classic
#3
#4
RE: Lowering Front End...lowers seat height by ?
ORIGINAL: huffhuff
best to lower both ends equally. changing height on one end only changes the front end rake (Geometry still is alive).
best to lower both ends equally. changing height on one end only changes the front end rake (Geometry still is alive).
#5
#6
RE: Lowering Front End...lowers seat height by ?
I placed 12" 's on the back..."works"...and went with a corbin closer/lowered dual touring ...and am trying to decide is it worth the effort /cost to drop the front end the 1.5 inches that a Harleyor a Progressive kit may give....I can not see the front dropping the seat height like the lowering the back did....not in the same proportion anyway?
I am hoping some one on has an idea because I know that a lot of have dropped the front end.
I am hoping some one on has an idea because I know that a lot of have dropped the front end.
Thread
Thread Starter
Forum
Replies
Last Post