looks good. i am in the middle of changing out my bars right now as well. i went with the cyclesmith 13s so it takes making a few more adjustments. i am also adding cruise which mean digging a little farther as well. i will post up some pics when i get done.
Bertk, Great write up and pics of the install. The Krome Werks 300504 Tall wide sweeper bars for my 99 just came on Wed. Looking forward to getting them on over the winter. Wondering if you could please look up in your parts manual for your 08 the part number for the one piece clamp. Thanks much Bryan
looks good. i am in the middle of changing out my bars right now as well. i went with the cyclesmith 13s so it takes making a few more adjustments. i am also adding cruise which mean digging a little farther as well. i will post up some pics when i get done.
Cruise control is on my wish list. I would be interested in seeing some pics of the cruise control wiring installed.
Bertk, Great write up and pics of the install. The Krome Werks 300504 Tall wide sweeper bars for my 99 just came on Wed. Looking forward to getting them on over the winter. Wondering if you could please look up in your parts manual for your 08 the part number for the one piece clamp. Thanks much Bryan
My 08 SG came with the one piece riser clamp. You may want to check and see if you already have one. This is the only PN 55918-08 I have.
My 08 SG came with the one piece riser clamp. You may want to check and see if you already have one. This is the only PN 55918-08 I have.
My 99 has the 2 piece not good setup. I had a friend I work with go to Lanc HD and ask for the one piece clamps for him and I but they had no clue. I put that # in online at Chicago HD and that's what I needed. Thanks again Bud.
My 99 has the 2 piece not good setup. I had a friend I work with go to Lanc HD and ask for the one piece clamps for him and I but they had no clue. I put that # in online at Chicago HD and that's what I needed. Thanks again Bud.
You're welcome Bub.
This thread was created for Road Glide handlebar swapping. You may find it helpful.
This green connector, couldn't you just splice the wires together and remove it altogether? I'm trying to understand why it's so special that you need to buy a whole another unit just to get away from the connector?
I'm going to buy an 09 SG in March or April, and from sitting on them, those bars are the ones I need. Excellent post. I'll be looking for this one after I get my bike.
This green connector, couldn't you just splice the wires together and remove it altogether? I'm trying to understand why it's so special that you need to buy a whole another unit just to get away from the connector?
Anybody know?
lp
I suspect it's a liability issue. If something goes wrong with the FBW throttle and someone gets hurt...
cant wait to get home this weekend I have some 2+ sweepers sitting at the house waiting to be installed on my rg this weekend. Ill also be looking at doing the internal wiring as well....just gotta read up on what all is involved